2.1。低能耗照明系統首先，參照低能量的照明系統的一般定義，它被稱為燈

2.1。低能耗照明系統首先，參照低能量的照明系統的一般定義，它被稱為燈具使用低能量的光單元，使得所需要的能量可以被抑制。一般地，兩種類型的低能量照明設備，即，發光二極管（LED）和緊湊型熒光燈，可在市場上見到（宰鉉，1930年）。雖然建議更換所有照明設備具有低能耗照明系統的安裝和應用的限制可能排除低能量的照明系統。例如，大多數LED的要求低電流，而他們無法調暗，這樣它會從某個應用程序（ADAP解決方案有限公司，2019）被排除在外。否則，特殊設計的設備和調光器都需要使亮度控制和色調的變化。

結果 (英文) 1:

2.1. Low power lighting system

First, with reference to the general definition of the illumination system low energy, it is referred to the lamp unit using a light of lower energy, so that the required energy can be suppressed. In general, two types of low energy lighting device, i.e., a light emitting diode (LED) and the compact fluorescent lamps, can be seen on the market (Jae-Hyun, 1930). Although it is recommended to replace all lighting devices having a low power consumption limits and applications install lighting system may exclude the low energy lighting system. For example, most LED's low current requirements, but they can not be dimmed, so that it will from an application (ADAP Solutions Ltd., 2019) are excluded. Otherwise, specially designed equipment and dimmers is necessary to change the brightness and hue control.

結果 (英文) 2:

2.1。 Low-energy lighting systems

First, by reference to the general definition of a low-energy lighting system, it is known as a lamp that uses a low-energy light unit so that the required energy can be suppressed. Generally, two types of low-energy lighting, namely, light-emitting diodes (LEDs) and compact fluorescent lamps, are available on the market (Zai, 1930). Although it is recommended to replace all lighting equipment with low-energy lighting system installation and application restrictions may exclude low-energy lighting systems. For example, most LEDs require low currents and they cannot dim so that they are excluded from an application (ADAP Solutions Ltd., 2019). Otherwise, specially designed devices and dimming devices require brightness control and tonal changes.

結果 (英文) 3:

2.1。 Low energy lighting system
First of all, referring to the general definition of low-energy lighting system, it is called the light unit of low-energy lamps, so that the required energy can be suppressed. Generally, two types of low-energy lighting devices, light-emitting diode (LED) and compact fluorescent lamp, are available on the market (Zaiyuan, 1930). Although it is recommended that all lighting equipment be replaced with low-energy lighting systems, the limitations of installation and application may exclude low-energy lighting systems. For example, most LEDs require low current and they cannot dim, so it will be excluded from an application (ADAP solutions, 2019). Otherwise, specially designed equipment and dimmer need to make brightness control and tone change.