4 imprimatura: General filling rib

4 imprimatura: General filling rib complete began to wipe the bottom ash should be around 2h, wipe before wipe a thin layer of ash, joint stratification loading gear, leveling, and vertical, horizontal scraping bar. Look, with wood trowel Mao Cha, and then check whether the formation of a grey, and with a vertical flat
7.3 doors and windows
1. aluminum alloy doors and windows wire supporting board check the wall installation
(1) selection of aluminum alloy doors and windows accessories and mountings, other than stainless steel, shall be the anticorrosion treatment.
(2) steel doors and windows frame before the installation, should first check the window and the size of the hole and embedded iron parts, general paint surface, the window frame hole width 50mm;The window height is 50mm; the door of the entrance of 25mm. Steel doors and windows installation requirements are shown in table 7.1.

結果 (中文) 3:

4抹底灰：一般填充肋完全开始抹底灰应在2h，擦前擦一层薄薄的灰，联合分层装档，平整，垂直，水平刮杆。看，用木抹子毛茶，然后检查是否一个灰色的形成，和一个垂直平面
7.3门窗
1。铝合金门窗线支撑板检查墙面安装
（1）铝合金门窗配件和配件的选择，而不是不锈钢，应防腐处理。
（2）在安装钢门窗框架，首先应该检查窗孔的大小和预埋铁件，一般涂料表面，窗孔宽度50mm；窗口的高度为50mm；25mm的入口的门。钢门窗安装要求如表7.1所示。