Für das System R744 im MFA muss der

Für das System R744 im MFA muss der Wärmetauscher per Halter im Vorbau befestigt werden. Es werden zusätzlich 2 Befestigungspunkte am Motorlager von der Baureihe gefordert.

Das Gehäuse vom Motorlager muss so geändert werden, dass zwei angegossene Dome mit Löchern die erfoderlichen Befestigungspunkte des Halters aufnehmen können

結果 (英文) 1:

The heat exchanger by holder in the stem must be secured for the system R744 in the MFA. In addition 2 fixing points to the motor bearings of the series are required.The housing of the motor bearings must be changed so that two dome cast-on can take the required fixing points of bracket with holes

結果 (英文) 2:

For the system R744 in MFA of the heat exchanger by holders must be secured in the stem. There are additionally required 2 fixing points on the motor bearings of the series. The housing of the motor bearings must be changed so that two cast-dome with holes to accommodate the erfoderlichen attachment points of the holder

結果 (英文) 3:

for the system to the heat exchanger in the mfa r744 via holders in stem attached. it will add 2 points of attachment on the motor mount from the series called.

the housing of engine mounts must be changed to that of two angegossene dome with holes about the points of attachment of the holder can include