2276.00m. Circulated hole clean, ba

2276.00m. Circulated hole clean, back reamed from bottom to 1789.00m, Pulled out of hole. Made up 12-1/4” directional drill BHA#3 with PD and ran in hole to bottom. Drilled 12-1/4” hole to 2581.35m, geology circulated, continued drilled hole to 2750.00m circulated hole clean, back reamed to 1900.00m, pull out of hole to surface. Retrieved 13-3/8” wear bushing. Prepared to run 9-5/8” casing. Ran in 9-5/8” casing to 2745.41m. Picked up cement head surface line. Circulated two bottoms up. Pressure tested 300psi/5mins & 3000psi/10mins, OK. Performed cement job. Lay down cement head surface line. Waite on cement. Serviced rig and cleaned up rig floor, well head job.

結果 (中文) 1:

2276.00米。流通孔干净，请从下到1789.00米，铰孔的孔拉出。由12-1/4“定向钻机钻具组合#与PD，跑在孔底。地质钻探12-1/4“孔2581.35米，流传到2750.00米流传的孔干净，继续钻孔，回扩髓1900.00米，拉孔表面。检索13-3/8“穿套管。准备运行9-5/8“套管。跑在9-5/8“外壳2745.41米。拿起水泥头表面线。流传两个按钮。压力测试300psi/5mins&3000psi/10mins，OK。完成水泥作业。放下水泥头面线。怀特对水泥。服务钻机和清理钻台，井口工作。

結果 (中文) 2:

2276.00m。循环孔清洁，后扩底1789.00m，拉出来的洞。由12 - 1 / 4“定向钻钻具#3钯和跑在孔底。钻12 - 1 / 4“孔2581.35m，地质循环，继续钻洞2750.00m循环孔清洁，后扩1900.00m，退出孔表面。检索13 - 3 / 8“套管磨损。准备运行9 - 5 / 8“套管。在9 / 8”套管2745.41m接水泥头表面线。循环2干杯。压力测试300psi / 5分钟&000磅/英寸2 / 10分钟，好。完成作业。躺在水面线水泥头。韦特牌水泥。服务台和清理钻台，井口工作。

結果 (中文) 3:

2276.00 · 循环孔清洁，回扩至 1789.00 米，从底部拉出洞。12-1/4"定向钻与 PD BHA#3 组成，并在洞里跑到底部。钻 12-1/4"到 2581.35 米，地质循环、 持续钻孔到 2750.00 m 分发孔清洁、 扩回 1900.00 m、 表面起钻洞。检索到 13-3/8"穿套管。准备运行 9-5/8"套管。跑在 9-5/8"到 2745.41 m 套管。拾水泥头水面线。分发了两个底。压力测试 & psi/5 分钟 300 3000psi/10 分钟，确定。执行的水泥作业。放下水泥头水面线。对水泥的怀特。已盖销钻机和清理钻机楼井口作业。