化粧品製造工廠應就其採購之原料與包裝材料進行下列識別：(一) 標示原料

化粧品製造工廠應就其採購之原料與包裝材料進行下列識別：
(一) 標示原料及包裝材料之裝載容器，以供確認原料與批次資訊。
(二) 對有出現瑕疵而可能影響產品品質之原料與包裝材料，於未決定如何處理前，均應留
存。
(三) 依據原料與包裝材料係允收、拒用或隔離等不同狀態，以適當方法標識區別。但如有
其他系統（辨識方法或程序）能確保具同等辨識效果者，得取代之。

結果 (英文) 1:

Cosmetics manufacturing facility should be made for the purchase of raw materials and packaging materials for the following recognition:(A) the marked containers of raw materials and packaging materials, raw materials for confirmation and batch information.(Ii) the defects which may affect the quality of raw materials and packaging materials of the product, and, prior to deciding how to deal with the former, shall remainDeposit.(C) according to the raw materials and packaging materials is acceptable, reject, or quarantine in different States, to identify the difference between appropriate methods. But if thereOther systems (identification methods or procedures) to ensure equivalent identification results, replace it.

結果 (英文) 2:

Cosmetics manufacturing plant should be carried out on its procurement of raw materials and packaging materials to identify the following:
(a) raw materials and loading containers labeled packaging material, for confirmation of raw materials and batch information.
(Ii) there are defects in the product which may affect the quality of raw materials and packaging materials, has not decided how to deal with before, should stay
deposit.
(Iii) on the basis of raw materials and packaging materials acceptance department, refused to use different or isolated state, an appropriate method to identify differences. But if any
other system (identification methods or procedures) to ensure recognition of the effects of equivalent, have to replace it.

結果 (英文) 3:

Cosmetics manufacturing plants should be the following identification of raw materials and packaging materials:(a) the loading of the materials and packaging materials to be used for the validation of raw materials and batch information.(two) the raw materials and packaging materials that may affect the quality of the product, which may affect the quality of the product, shall remain in the raw materials and packaging materials before deciding how to deal with it.Deposit.(three) according to the materials and packaging materials, such as acceptance, rejection, or isolation and other different status, with appropriate methods to identify the difference. But if there isOther systems (identification methods or procedures) to ensure that the same identification effect, have to replace the.