4.2 #6炉空气预热器出口至除尘器入口烟道造成该段压降的主要位置有连

4.2 #6炉空气预热器出口至除尘器入口烟道
造成该段压降的主要位置有连续转弯变径处，半干法脱硫设备出口连续转弯处，因此优化时主要针对该部分进行优化，原烟道模型以及优化后的烟道模型分别见图3。

結果 (英文) 1:

4.2 #6 boiler air preheater outlet to the filter inlet ductMainly contributing to this pressure drop at location with continuous turning diameter, semi-dry flue gas desulfurization device exports continuous turning, therefore optimizing focuses on optimizing this part, the original flues model and optimized flues model are shown in Figure 3.

結果 (英文) 2:

4.2 # 6 furnace air preheater outlet to the inlet flue dust
caused by the position of the major segments of a continuous drop at the turn adjustable, semi-dry desulfurization equipment exports consecutive corner, thus optimizing mainly optimized for this section, flue flue original model and the optimized model are shown in Figure 3.

結果 (英文) 3:

4.2 #6 furnace air preheater outlet to dust collector inlet flueThe main position of the pressure drop in the continuous turning diameter, semi dry desulfurization equipment export continuous turning, so optimization mainly for this part is optimized, the original flue flue model and optimization are shown in figure 3.