關於土壤內的砂、石、土比例等的詳細檢測，我們可能需要委託第三方公正單位

關於土壤內的砂、石、土比例等的詳細檢測，我們可能需要委託第三方公正單位”SGS國際檢測”進行土壤分類分析，根據SGS的規定:1. 檢測需要20公斤的土壤樣本，須排除直徑5公分以上石頭以及其他人造物2. 測驗結果等待時間約2周3. 可以測出此區砂、土、礫石所占比例；CNS 12387土壤分類與適用等級評估因此下一步我們可能需要額外再前往基地採集土壤樣本，並且需要等待約15天左右才可獲得檢測報告。

結果 (英文) 1:

About detailed inspection of sand, stone, soil proportion in the soil, we may need a third party impartial analysis of soil classification units "SGS international inspection," according to the provisions of SGS:
1. detection requires 20 kg of soil samples shall be excluded diameter stone and other artifacts more than 5 cm
2 test results waiting time of about two weeks
3. You can measure this area of sand, soil, gravel proportion; CNS 12387 soil classification and applicable rating

so the next step then we may require additional Go to the base gathering soil samples, and need to wait about 15 days before obtaining the test report.

結果 (英文) 2:

For detailed testing of sand, stone, soil ratio, etc. in the soil, we may need to commission a third-party impartial unit "SGS International Testing" for soil classification analysis, according to SGS regulations:
1. Testing of soil samples requiring 20 kg, with the exclusion of stones and other man-made objects with a diameter of more than 5 cm
2. The test results wait time is about 2 weeks
3. The proportion of sand, soil and gravel in this area can be measured; CNS 12387 soil classification and applicable grade assessment

So the next step may be to go to the base to collect soil samples, and we will have to wait about 15 days for the test report.

結果 (英文) 3:

For the detailed testing of sand, stone, soil proportion, etc. in the soil, we may need to entrust a third-party impartial unit "SGS international testing" for soil classification analysis. According to the provisions of SGS:
1. If 20kg soil sample is needed for testing, stones and other artificial objects with diameter of more than 5cm shall be excluded
2. The waiting time for test results is about 2 weeks
3. The proportion of sand, soil and gravel in this area can be measured; CNS 12387 soil classification and application grade evaluation
Therefore, we may need to go to the base to collect soil samples in the next step, and we need to wait about 15 days to get the test report.