1、炉体 炉体主要由各种型钢及板材焊接而成，炉盖为考虑保温及取料方便，

1、炉体
炉体主要由各种型钢及板材焊接而成，炉盖为考虑保温及取料方便，炉盖的开启采用左右对开式结构，使用时炉盖打开搁置在一边，不使用保温时炉盖关闭。
2、炉衬
炉衬采用复合式结构，炉膛的内衬采用节能型的耐火砖砌筑，在炉膛耐火砖和炉壳之间粘上保温棉，用作于炉子的保温。同时为考虑铝液的渗漏、损坏加热元件，在炉底预留、防止铝液渗漏的排出孔。
3、坩埚
本熔化式电加热炉采用铸钢坩埚。为考虑坩埚的便用寿命及减少因坩埚渗漏而损坏炉子。建议用户采用二只坩埚交替使用。因铝液的渗漏性比较强，每只坩埚在使用前都要涂上防止渗漏的涂料、而后再烤干。（本炉配置1只坩埚、备件另需购买）
4、加热系统
加热系统的排布：采用1只高温燃油烧嘴，布置在炉膛的侧倾斜面。
5、倾斜系统
铝锭熔化完毕，通过电动减速机翻转系统进行侧翻，使得铝液能够从坩埚中倒出。

結果 (中文) 2:

1, the furnace body
furnace mainly by the various type of steel and plate, the stove cover is considering the insulation and the material is convenient, opening the furnace cover of the left and the right to use open structure, furnace cover open aside, do not use insulation furnace cover is closed.
2, lining
lining adopts the composite structure, the furnace lining using energy-saving refractory brick masonry, between the furnace refractory bricks and the furnace shell glue cotton insulation, thermal insulation used in furnace. At the same time, considering the leakage of liquid aluminum damage the heating element, at the bottom of the furnace, prevent the discharge hole for aluminum liquid leakage.
3,
the melting crucible type electric heating furnace adopts cast steel crucible.To consider the crucible with life and reduce the damage due to the crucible leakage. Users are advised to use the alternate use of two crucible. Because of the leakage of liquid aluminum is strong, each crucible before use should be coated with the coating to prevent leakage, and then dried. (the furnace configuration 1 crucible, spare parts should buy
4) arrangement, heating system
heating system: the 1 high temperature fuel burner, arranged in a hearth roll slope.
5, tilt system
aluminum ingot melting is completed, for rollover through electric reducer turning system, the aluminum liquid can be poured from the crucible.