Time pressure is a versatile method

Time pressure is a versatile method of dispensing that
functions across a wide range of viscosities. This
dispense method works by applying pressure to the syringe.
This pressure pulse is controlled by the software and can
be used to dispense either lines, fi lls, or dots. With an
appropriate fl uid and nozzle confi guration, very fi ne and
repeatable dots and lines can be dispensed.
This is a great addition
to fully automatic systems
The amount of pressure is automatically controlled through
the software. The amount of pressure is determined by a
relationship between the material being dispensed and
the application fl ow rate. When dispensing is fi nished, an
adjustable vacuum is applied to the syringe that prevents
material from dripping. The vacuum is adjustable to avoid
pulling air into the needle.
Syringe sizes from 5 cc to 30 cc may be used with the included
syringe kit. An optional level detect is available - it will notify
the operator when the material level gets low.
Cleanup using this method is very simple. Because material
is being dispensed directly from the syringe, the operator
may dispose of it after it is empty. Additionally, the needles
that are commonly used are disposable Luer-Lok® type. An
operator may change a syringe and needle, and re-calibrate
the system within a matter of two (2) minutes. Again, no
cleaning is required as all wetted parts are disposable.
The Liquid Dispense option prevents material drool when the
valve is not actively dispensing by maintaining a proper level
of vacuum to the syringe. Control of the vacuum applied to
the Liquid Dispense option during times when the syringe is
not dispensing becomes especially useful when using low
viscosity materials.
Time Pressure with
10 cc Syringe
Operation Diagram
Specifi cations
• Syringe Compatibility . . . . . . . . . . EFD or Semco: 5 cc, 10 cc, 30 cc
• Dispense Tips . . . . . . . . . . . . GPD S Type Luer or other Luer nozzles
• Viscosity Range . . . . . . 1 to 100,000+ cps. Consult GPD for details.
• Pressure Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 80 psi
• Minimum Pulse Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.030 s

結果 (繁體中文) 1:

時間壓力是配藥的通用方法整個的粘度範圍廣泛的功能。這通過對注射器應用壓力免除法的著作。這種壓力脈衝控制軟體和能用來免除線條、 fi lls 或點。與適當的 fl uid 和噴嘴配置、 非常 fi ne 和可以配發可重複的點和線。這是一個偉大的除了全自動系統壓力量自動控制通過該軟體。壓力的量由被免除的材料之間的關係和應用 fl ow 率。配藥時上網完工可調真空應用於防止注射器滴水的材料。真空是可調，以避免拉進針的空氣。注射器大小從 5 到 30 cc cc 可與收錄注射器套件。可選的水準檢測是將通知可用-當物質層面獲取低的運算子。使用這種方法的清理是非常簡單的。因為材料直接從注射器，運營商正在進行分配可處置它之後它是空的。此外，針這常用的是一次性的 Luer-Lok® 類型。一個運營商可能會改變一個注射器和針頭，和重新校準系統在短短的兩個 2 分鐘。再次，不清洗是必需的因為濕的所有部件都都可支配。液體分配選項防止材料口水時閥門不積極為處方配藥的維持一個適當的水準真空注射器。應用於真空的控制時期當注射器是液體分配選項不配藥變得尤為有用，使用低時粘度的物料。時間壓力與10 毫升注射器運行圖規格• 注射器的相容性。。。。EFD 或 Semco: 5 10、 抄送、 抄送 30 cc• 免除提示......GPD S 型針頭或其他 Luer 噴嘴• 粘度範圍......1 到 100000 + cps。有關詳細資訊請參考 GPD。• Pressure Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 到 80 磅/平方英寸• Minimum Pulse Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.030 s