更換回來有問題的齒輪箱，約350個。我們將此批次齒輪箱寄回工廠進行了檢

更換回來有問題的齒輪箱，約350個。我們將此批次齒輪箱寄回工廠進行了檢測，發現產品本身並不存在質量問題，調查同一批次的產品但使用在其他項目中亦沒有出現同類型問題。根據我們在酒店開業前產品就出現問的情況而視，工廠給予的結論是由於現場安裝產品的過程中，並沒有按規範進行正確搬運安放及安裝產品，從而導致電子蓋板內齒輪箱的齒輪在搬運過及安裝過程中受到損傷，致使開業後電子蓋板相繼出現齒輪損壞之現象

結果 (英文) 1:

Replace the gear box back about 350. We see this batch was sent back to the factory for inspection of the gear box, found the product itself does not have quality problems, surveys the same batch of product but has no similar problems in other projects. According to our products in front of the hotel there is asked to see, conclusions from the factory is as in the process of installing the product and not installed according to specifications for proper handling and installation the product, causing the electronics cover plate gear box gears during handling and damage during installation, resulting in electronic cover appeared one after another the gear damage after opening

結果 (英文) 2:

Replace faulty gear box back about 350. We call this batch returned gearbox factory were tested and found not the product itself quality problems, investigate the same batch of the product but also use the same type of problem does not occur in other projects. Q circumstances depending on the product before it appears in the opening of our hotel, giving the plant site to the conclusion that due to the process of installing the product, and not according to specifications for proper handling and installation of product placement, resulting in the electronic gearbox gear cover excessive damage during handling and installation process, resulting in damage to the cover after opening electronic gear phenomenon has emerged

結果 (英文) 3:

Replace the gear box with the problem back, about 350. We send this batch of gear boxes back to the factory for testing, found that the product itself does not exist quality problems, the investigation of the same batch of products, but also used in other projects, there is no problem with the same type. According to the US in the prior to the opening of the hotel product will appear asking, the conclusion is given the factory during the installation of the product, and are not properly handling according to the specification and installation of products placed inside the cover, which leads to the electronic gear box gear in handling and damage during the installation process, resulting in the opening of electronic board have the phenomenon of gear damage