我们通常会把你们的板拼在一个大的板里，铣外形的刀的尺寸由板和板之间的距

我们通常会把你们的板拼在一个大的板里，铣外形的刀的尺寸由板和板之间的距离确定的。通常我们的距离在2.2mm-2.6mm之间，所以我们不推荐使用2.4mm。

結果 (英文) 1:

We usually put your plate in a large plate, milling shape of dimensions and determined by the distance between the plates. Usually the distance between 2.2mm-2.6mm, so we do not recommend the use of 2.4mm.

結果 (英文) 2:

We usually put your plate in a big fight in the plate, the size of the milling cutter shape by the distance between the board and the board determined. Usually we distance between 2.2mm-2.6mm, so we do not recommend the use of 2.4mm.

結果 (英文) 3:

We usually put your board in a large board, the size of the milling cutter is determined by the distance between the plate and the plate. Usually our distance is between 2.2mm-2.6mm, so we do not recommend using 2.4mm.