由法兰、筒体、蝶形封头炉底组焊而成，采用双层水夹层结构，内壁为不锈钢（

由法兰、筒体、蝶形封头炉底组焊而成，采用双层水夹层结构，内壁为不锈钢（304）抛光，外壁优质碳钢油漆处理，法兰平面开设密封槽，采用“O”圈真空密封，设有水冷装置（防止因温度过高“O”圈老化），侧部设有抽气孔、感应线圈电极引出孔、放气孔等，防爆口，底部设有进气孔、承料台等，炉体底部焊有支撑架。

結果 (英文) 1:

By flange, and tube body, and Butterfly shaped seal head furnace end of group welding and into, used double water sandwich structure, within wall for stainless steel (304) polished, outside wall quality carbon steel paint processing, flange plane opened sealed slot, used "o" circle vacuum sealed, has water-cooled device (prevent due to temperature high "o" circle aging), side Department has pumping stomatal, and Induction coil electrode leads hole, and put stomatal,, explosion-proof mouth, bottom has intake hole, and bearing material Taiwan,, furnace body bottom welding has support rack.

結果 (英文) 2:

The flange, cylinder, butterfly head welded bottom group, with double water sandwich structure, the inner wall of stainless steel (304) polished, high-quality carbon steel wall paint handling, flat flange seal groove creation, using "O "Circle vacuum sealed with water-cooling device (to prevent overheating" O "rings aging), the side with a suction hole, induction coil electrode extraction hole, put holes, etc., Vent, the bottom has air intake, Cheng Taiwan and other material, the bottom of the furnace welded bracket.

結果 (英文) 3:

The flange, tube, butterfly head bottom welded together, using double the water sandwich structure, the inner wall is stainless steel (304) polishing, outer wall paint processing of high quality carbon steel, flange surface is provided with a sealing groove, with "O" ring vacuum sealing, is provided with a water cooling device (to prevent the temperature is too high "O" ring aging), the lateral part is provided with a suction hole, induction coil electrode lead out hole, vent hole, vent, with air intake at the bottom, the material platform, the bottom of the stove body is welded with a support frame.