等於機台的開蓋要剛剛好在那個位置，所以機台要再往後退40cm，蓋子的中

等於機台的開蓋要剛剛好在那個位置，所以機台要再往後退40cm，蓋子的中心頂端才能剛好那，但原本機台後方有預留120 cm 要放Laser PS，但機台又往後退40cm只剩80cm，這樣後方無法擺放Laser PS。唯一能放的位置只剩N780與P8800擺放的中間走到後面，如下圖:

結果 (英文) 1:

Opening the lid of the machine is equal to that position just Fortunately, the machine back to go down to 40cm, to the center of the top cover is just that, but the rear of the machine has had to put aside 120 cm Laser PS, but machine went, Back 40cm only 80cm, so the rear can not be placed Laser PS. The only way to release the intermediate position only N780 placed P8800 come back, as shown below:

結果 (英文) 2:

Now that's it.

結果 (英文) 3:

When the cover of the machine needs to be just in that position, so the machine needs to move back 40 cm, and the top of the cover center can just be there. But there is 120 cm reserved in the back of the original machine to put laser PS, but there is only 80 cm left in the back of 40 cm, so laser PS can't be placed in the back. Only the middle of n780 and p8800 can be placed to the back, as shown below: