觀察達因試液是否能均勻塗步於蓋體上，若能均勻塗步則判定為OK(兩圖之右

觀察達因試液是否能均勻塗步於蓋體上，若能均勻塗步則判定為OK(兩圖之右者)，若無法均勻塗步於蓋體上且成水珠狀則判定為NG(兩圖之左者)

結果 (英文) 1:

Dyne test solution was observed whether the step evenly coated on the cover, if it is determined that a uniform coating step is OK (two right), who, if not uniformly coated on the step into water and the lid shape is determined as NG ( FIG two left) is

結果 (英文) 2:

To observe whether the Dain test fluid can be evenly applied to the cover, if the uniform dot is determined to be OK (the right of the two pictures), if not evenly applied to the cover and water beads-shaped is determined to BE NG (the left of the two figures)

結果 (英文) 3:

Observe whether the dyne test solution can be evenly applied on the cover. If it can be evenly applied, it will be judged as OK (the right of the two figures); if it can not be evenly applied on the cover and it is in the shape of water bead, it will be judged as ng (the left of the two figures)