4.4 吸收塔出口至烟囱入口烟道吸收塔出口至烟囱出口段为#5炉与#6炉

4.4 吸收塔出口至烟囱入口烟道
吸收塔出口至烟囱出口段为#5炉与#6炉共用，由计算结果与模拟结果分析可知，其主要压降位置位于烟囱入口与烟囱入口前弯头，烟囱入口结构不便修改，此次优化只针对烟囱入口前弯头，优化方法为加装导流装置，减少弯头处回流区，降低压损。

結果 (英文) 1:

4.4 absorption tower outlet to the chimney inlet ductExport outlet to the chimney in the absorption tower for #5 furnace #6 furnace share, calculation and results analysis, the pressure drop of the main entrance is located in the chimney and chimney before the elbow, chimney entrance structures modified with reduced mobility, this optimization only for the chimney before the elbow, optimization methods for the retro-fitting of guide vanes reduce elbow flow, reduce pressure loss.

結果 (英文) 2:

4.4 absorber outlet to the inlet chimney flue
absorber outlet to the chimney outlet section of the furnace # 5 and # 6 furnace is shared by the calculation results with the results of simulation analysis shows that the main drop location in the chimney and chimney entrance front entrance elbow, chimney inlet structure inconvenience modify, optimize only for the front entrance of the chimney elbow, optimization method for the installation of the deflector to reduce reflux elbow area, reducing pressure loss.

結果 (英文) 3:

4.4 absorber outlet to chimney inlet flueThe common absorption tower outlet and the chimney outlet section for #5 furnace and #6 furnace, the calculation results and simulation results, the main position is located in the entrance pressure drop and the chimney chimney entrance elbow, chimney entrance structure inconvenience modification, this optimization only for the chimney entrance elbow, optimization method for installing the guiding device, reduce the bend of recirculation zone to reduce the pressure loss.