而界面分別有三種類型的負載：壓力、拉伸和剪切力。而這些力的類型可取決於

而界面分別有三種類型的負載：壓力、拉伸和剪切力。而這些力的類型可取決於植入物線的形狀。因此，理想的植入物螺紋設計應在壓力和拉伸力之間需達到平衡，同時最大程度地減少剪切力的產生。

結果 (英文) 1:

And the interface are three types of load: pressure, tensile and shear forces. And these forces may depend on the type of the shape of the line was implanted. Accordingly, it is desirable for an implant screw should be designed to achieve a balance between the pressure and tensile forces, while minimizing shear forces.

結果 (英文) 2:

The interface has three types of loads: pressure, stretching, and shear. The type of these forces can depend on the shape of the implant line. Therefore, the ideal implant thread design should be balanced between pressure and tensile force, while minimizing shear.

結果 (英文) 3:

There are three types of loads on the interface: pressure, tension and shear. The type of forces may depend on the shape of the implant wire. Therefore, the ideal implant thread design should balance the pressure and tensile force, and reduce the shear force to the greatest extent.