頁面中間會顯示9 個感測器啟動狀態(黃色表示啟動, 灰色表是關閉, 藍

頁面中間會顯示9 個感測器啟動狀態(黃色表示啟動, 灰色表是關閉, 藍色表是永遠啟動)6.1 在家模式按下後可將保全模式設定為居家模式並開啟預設好的居家保全所包含的感應器偵測項目(居家保全所包含的感應器偵測項可在 “首頁” “設定” “用戶設置”  “居家模式” 來設置)。6.2 外出模式按下後可將保全模式設定為外出模式並開啟預設好的外出保全所包含的感應器偵測項目(外出保全所包含的感應器偵測項可在 “首頁” “設定” “用戶設置”  “外出模式” 來設置)，開啟後，首頁的 “外出”圖示會變為綠色，當包含在內的感測器如有其中一項被觸發， 圖示則變為紅色。6.3 夜間模式按下後可將保全模式設定為夜間模式並開啟預設好的夜間保全所包含的感應器偵測項目(夜間保全所包含的感應器偵測項可在 “首頁” “設定” “用戶設置”  “夜間模式” 來設置)，開啟後，首頁的 “夜間”圖示會變為綠色，當包含在內的感測器如有其中一項被觸發， 圖示則變為紅色。6.4 臨時模式按下後可將保全模式設定為臨時模式並開啟預設好的臨時保全所包含的感應器偵測項目(臨時保全所包含的感應器偵測項可在 “首頁” “設定” “用戶設置”  “臨時模式”來設置)。6.5 警報歷史警報歷史的頁面如下圖所示:

結果 (英文) 1:

Middle of the page will show nine start sensor status (yellow for start, gray is off the table, the table is always blue boot)
6.1 home mode
after pressing preservation mode can be set to turn on preset mode and home good home preservation sensors to detect project included (home preservation sensors to detect items included in the "Home"  "set"  "user settings"  "home mode" is set).
6.2 out pattern
sensor detects item and press the preservation mode can be set to go out to a preset pattern and turn out a good sensor detects preservation project included (out maintenance included in the "Home"  "Settings"  "user settings"  "go mode" is set), after opening, home of "going out" icon will turn green when the sensor is included if one is triggered, the icon changes to red.
6.3 Night mode
After pressing preservation mode can be set to night mode and turn the sensor to detect a good night preservation project presets included (sensors detect items included night-preservation may  in the "Home", "set"  "user settings"  "night mode" setting), after opening, home of "night" icon will turn green when the sensor is included if one is triggered, the icon changes to red.
6.4 temporary mode
after pressing preservation mode can be set to open a temporary mode and the sensor detects a preset good interim project included (sensors detect the interim term included in the "Home"  "Settings"  "user settings"  "temporary mode" to set).
6.5 Alarm History
Alarm History page as shown below:

結果 (英文) 2:

9 sensor start status is displayed in the middle of the page (yellow for start, gray table is off, blue table is always started)
6.1 At Home Mode
Pressing can set the preservation mode to home mode and turn on the sensor detection items contained in the default good home preservation (the sensor detection items included in home preservation can be set in "home page"
6.2 Out of Office Mode
Pressing on, you can set the preservation mode to out-of-office mode and turn on the sensor detection items included in the default good out-of-office preservation (the sensor detection items included in out-of-office preservation can be set in "Home" ( "Set" When one of the included sensors is triggered, the icon turns red.
6.3 Night Mode
Pressing, you can set the preservation mode to night mode and turn on the sensor detection items included in the default good night-time preservation (the sensor detection items included in night-time preservation can be set in "home page" ( "set" and "user settings" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When one of the included sensors is triggered, the icon turns red.
6.4 Temporary mode
Pressing, you can set the preservation mode to temporary mode and turn on the sensor detection items contained in the default good temporary preservation (the sensor detection items contained in the temporary preservation can be set in "Home"
6.5 Alert History
The page for the alert history is shown in the following image:

結果 (英文) 3:

The start status of 9 sensors will be displayed in the middle of the page (yellow indicates start, gray indicates close, blue indicates always start)
6.1 home mode
Press to set the security mode to home mode and open the sensor detection item included in the preset home security (the sensor detection item included in the home security can be set in "home page"  "setting"  "user setting"  "home mode").
6.2 out of office mode
Press to set the security mode to the out mode and open the sensor detection items included in the preset out mode (the sensor detection items included in the out mode can be set in "home page"  "Settings"  "user settings"  "out mode"). After opening, the "out" icon on the home page will turn green. If the included sensors have any of them When an item is triggered, the icon changes to red.
6.3 night mode
Press to set the security mode to night mode and turn on the sensor detection items included in the preset night security (the sensor detection items included in the night security can be set in "home page"  "Settings"  "user settings"  "night mode"). After turning on, the "night" icon on the home page will turn green. If the included sensors have any of them When an item is triggered, the icon changes to red.
6.4 temporary mode
Press to set the security mode to temporary mode and turn on the sensor detection items included in the preset temporary security (the sensor detection items included in the temporary security can be set in "home page"  "Settings"  "user settings"  "temporary mode").
6.5 alarm history
The alarm history page is shown in the following figure: