本文为恩平市恩平联升机械设备有限公司综合楼①轴结构设计计算说明书。该项

本文为恩平市恩平联升机械设备有限公司综合楼①轴结构设计计算说明书。该项目首层高为4.2m，2~5层层高3.3m，顶层（楼梯间）3m，建筑总高度为17.50m, 钢筋混凝土现浇框架结构，预应力管桩基础。
本文包括以下内容：结构布置，尺寸选择，荷载计算，内力分析与内力组合，配筋与验算，楼板设计，桩基础设计，结构电算及结构施工图绘制，电算结果与手算结果对比分析。

結果 (英文) 1:

This is Yun Ping Lian Sheng mechanical equipment co, enping ① shaft structure design and calculation of comprehensive building instructions. The project first floor layers of high 4.2m,2~5 high 3.3M, the top (stairwell) 3M, total building height is 17.50m, in reinforced concrete frame structure prestressed pipe-pile foundation.This article includes the following: the structural layout, size, load calculations, analysis of internal force and internal force combination of reinforcement and check floor design, pile foundation design and structural calculation and structure construction drawing, computerized results compared with the hand count results.

結果 (英文) 3:

This paper is a calculation manual for the design and calculation of the shaft structure of the mechanical equipment Co., Ltd., Enping, Enping.. The first layer of the project is 4.2m, 2~5 is 3.3m, the top floor (staircase) 3M, the total height of the building is 17.50m, reinforced concrete cast-in-place frame structure, prestressed pipe pile foundation.
This paper includes the following content: structural arrangement, size selection, load calculation, internal force analysis and the combination of internal force, reinforcement and checking, floor design, pile foundation design, structure calculation and structural construction drawings drawing, computerized results with the hand count results contrast analysis.