当刹车片的厚度小于车辆制造商允许的最小维修标准时。一般情况下，如果固定

当刹车片的厚度小于车辆制造商允许的最小维修标准时。一般情况下，如果固定式制动钳上的刹车片两边厚度差达到15mm时，浮动式制动钳上的刹车片两边厚度差达到3.0mm时就需要进行更换了。

結果 (英文) 1:

When the brake pad thickness is less than the minimum maintenance standards permitted by the vehicle manufacturer. Under normal circumstances, if the fixed-caliper brake pad thickness difference on both sides up to 15mm on, on a floating brake caliper brake pad thickness difference on either side of 3.0mm, we will need to be replaced.

結果 (英文) 2:

When the thickness of the brake pads is less than the minimum maintenance standards allowed by the vehicle manufacturer. Under normal circumstances, if the brake pads on both sides of the difference between the fixed caliper thickness reaches 15mm, the thickness of the brake pads on both sides of the difference between the floating caliper on reaching 3.0mm on the need for replacement.

結果 (英文) 3:

When the thickness of the brake pad is less than the minimum maintenance standard permitted by the vehicle manufacturer. Under normal circumstances, if the fixed brake caliper on both sides of the brake pad thickness difference reached 15mm, the floating brake pads on both sides of the thickness of the brake on the need to replace the 3.0mm.