In this state, the turbine is powered up to an idle speed.<br>For this purpose, the pump voltage is automatically ramped up progressively from the initial value.<br>In this state, the yellow "Standby" LED lights up to indicate that the turbine needs to be further blown. The red "pump running" LED indicates that the pump is switched on.<br>Normally, the speed of the turbine should now continue to increase until the programmed idle speed is finally exceeded. If this is the case, it jumps to the next state "Stabilise".<br>Under the following error conditions, the start-up process is aborted and<br>Page 33 of 48<br>"Slow-down" state:<br>The turbine does not reach/exceed the idle speed within approx. 40 seconds.<br>The increase in turbine speed is too small.<br>The measured exhaust gas temperature is too high.
正在翻譯中..
