. HYDRAULIC POWER UNIT MUST BE LOCA

. HYDRAULIC POWER UNIT MUST BE LOCATED SUCH THAT ALL HYDRAULIC LINES PITCH CONTINUOUSLY DOWNWARD AT A MINIMUM OF .25 INCH PER FOOT [21 MM/M] FROM VALVE ACTUATOR CONNECTIONS TO POINT OF CONNECTION ON HYDRAULIC POWER UNIT, WITH NO LOW POINTS IN LINE. REFER TO "HIGH

結果 (中文) 1:

.液压动力单元必须位于这样全液压线球场连续向下在最低.25 英寸每呎 [21 毫米/米] 从阀门执行器连接到点的连接液压动力单元，与无低点的线。请参阅"高

結果 (中文) 2:

。液压动力单元必须位于使得所有的液压管线PITCH继续往下移动在0.25英寸每英尺[21 MM / M] FROM阀门驱动装置连接，点连接上液压动力单元最低，具有无在线低点。请参阅“HIGH

結果 (中文) 3:

。液压动力单元必须位于这样所有液压管路间距连续向下至少25英寸每英尺21毫米/米]从阀门致动器连接到液压动力单元的连接点，没有低点的线。指“高