1.防塵蓋、O-Ring加矽油依方向套入按鍵溝槽內(必須完全嵌入溝槽內

1.防塵蓋、O-Ring加矽油依方向套入按鍵溝槽內(必須完全嵌入溝槽內)2.彈簧依方向裝到按鍵上，再依方向裝入按鍵孔(多繞半圈的部分-開口端必須朝外)3.產品倒插入治輔助治具中，版手下押固定殼件漏出E扣溝槽(不可商及電池蓋外觀表面及E扣槽必須超出平面)4.E扣依方向嵌入溝槽內(E扣必須完全套入溝槽內)"

結果 (英文) 1:

1. Put the dust cover, O-Ring and silicone oil into the key groove according to the direction (must be completely embedded in the groove) 2. Install the spring on the key according to the direction, and then install it into the key hole according to the direction (more than half a turn) Part - the open end must face outward) 3. Insert the product upside down into the auxiliary fixture, and press down the fixing shell to leak out of the E buckle groove (not negotiable, the appearance surface of the battery cover and the E buckle groove must be beyond the plane) 4. E buckle Insert it into the groove according to the direction (the E buckle must be completely inserted into the groove )"

結果 (英文) 2:

1. Dust cover, O-Ring and silicone oil should be inserted into the key groove in the direction (must be fully embedded in the groove)
2. Install the spring onto the button in the direction, and then install the button in the direction
Hole (the part with more than half a turn - the open end must face outward)
3. The product is inverted and inserted into the auxiliary fixture, and the lower part of the fixture is fixed with a fixed shell
The E buckle groove is leaked from the component (not available for sale), and the appearance surface of the battery cover and E
The buckle groove must exceed the plane
4. The E buckle should be inserted into the groove in the direction (the E buckle must be fully inserted into the groove
Internal)“

結果 (英文) 3:

1. The dust cover and O-Ring silicone oil are sleeved into the groove of the key in the direction (they must be completely embedded in the groove).
2. The spring is installed on the key according to the direction, and then the key is installed according to the direction.
Hole (part with more than half a turn-the open end must face outwards)
3. Insert the product into the auxiliary fixture, and press the fixed shell under the plate.
Parts leak out of the groove of E-buckle (it is not feasible to discuss the external surface of battery cover and E-buckle)
The buckle groove must be out of the plane)
4. The E button is embedded in the groove according to the direction (the E button must be completely embedded in the groove)
Inside) "