< File successfully loaded. File Ch

< File successfully loaded. File Checksum 0x32263
> Programming PROGRAM MEMORY area...
Error : Cannot communicate with the device !
Check the SWIM cable connection and check all the needed pin connections on the SWIM connector.

If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider:
Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low.

Error : < PROGRAM MEMORY programming failed.

結果 (中文) 3:

<文件成功加载。文件校验0x32263
>编程程序存储区……
错误：无法与设备通讯！
检查游泳电缆连接并检查所有需要的引脚连接在游泳连接器。如果应用程序代码使用

游泳禁用和复位引脚为输出或已禁用时钟分频器：
游泳现在尝试关闭在应用电源时NRST复位引脚被强制低。

错误：程序存储器编程失败。