將全距之平均值（R）及製程平均（X）以粗實線在水平方繪圖。管制界限（Ｕ

將全距之平均值（R）及製程平均（X）以粗實線在水平方繪圖。管制界限（ＵＣＬＲ，ＬＣＬＲ，ＵＣＬＸ，ＬＣＬＸ）則分別以虛線由水平方向畫出，並註明之。在分析之開始，這些線尚只為參考線而已。

結果 (英文) 1:

The mean value of full-pitch (R) and the average process (X) thick solid line drawing in the horizontal direction. Control limit (UCLR, LCLR, UCLX, LCLX) respectively, shown in dashed lines in the horizontal direction, and indicate it. At the beginning of the analysis, these lines are still only reference line only.

結果 (英文) 2:

The mean of full distance (R) and the average of the process (X) are plotted horizontally on a solid line. Control boundaries (UCLR, LCLR, UCLX, LCLX) are drawn horizontally by dashed lines and noted as it is indicated. At the beginning of the analysis, these lines are only reference lines.

結果 (英文) 3:

Draw the average value (R) of the whole distance and the average value (x) of the process in the horizontal direction with thick and solid lines. Control limits (uclr, LCLR, uclx, lclx) are drawn horizontally with dotted lines respectively, and noted. At the beginning of the analysis, these lines are only reference lines.