Hi Muto san非常抱歉,一直造成您的困擾,向XM DARWIN

Hi Muto san非常抱歉,一直造成您的困擾,向XM DARWIN確認之後,回覆狀況如下~1.第一批生產時, XM DARWIN 還未導入Connector 插拔治具,所以組裝LB時,沒有發現 Connector 位置沒有置中.2.這部分會在1月2日生產時,同步確認治具可以正常使用,也會提供插拔視頻與照片3.明天早上,會確認庫存的LCM,Connector 治具插拔的狀況(目前申請領取LCM中)

結果 (英文) 1:

Hi Muto san
very sorry that you have been causing trouble,
after DARWIN confirmed to XM, respond to the situation as follows -
1. When the first batch of production, XM DARWIN been imported Connector plug fixture, so when assembled LB, found no Connector position is not set in.
2. this chapter in the production of January 2, synchronization confirmation fixture can be used normally, videos and photos will also provide plug
3. tomorrow morning, will confirm inventory of LCM, Connector plug the fixture status
(currently apply for the LCM)

結果 (英文) 2:

Hi Muto san
I'm sorry to have been causing you trouble,
After confirming to XM DARWIN, the status of the reply is as follows
1. At the time of the first production, XM DARWIN had not yet imported the Connector plug-in tool, so when the LB was assembled, no connector position was found to be not in place.
2. This part will be produced on January 2nd, synchronous confirmation tool can be used normally, will also provide plug-in video and photos
3. Tomorrow morning, will confirm the inventory of LCM, Connector fixture plug-in status
(Currently applying to receive LCM)

結果 (英文) 3:

Hi Muto San
I'm very sorry for the trouble,
After confirming with XM Darwin, the reply status is as follows~
1. In the first batch of production, XM Darwin has not yet imported connector plug fixture, so when assembling lb, it is not found that the connector is not in the middle
2. During production on January 2, this part will synchronously confirm that the fixture can be used normally, and also provide plug-in video and photos
3. Tomorrow morning, we will confirm the status of LCM and connector tools in stock
(currently applying for LCM)