使用鋸弓將原本是銳角的部分修飾成圓角，先使用圓盤砂磨機大面積的磨過，較

使用鋸弓將原本是銳角的部分修飾成圓角，先使用圓盤砂磨機大面積的磨過，較小的地方可以什錦銼，最後再用砂紙由粗到細慢慢將外形修飾圓潤，如果表面有較大缺口可以使用補土將表面修飾一下，修飾到自己滿意之後就可以開始上色了。

結果 (英文) 1:

The bow was originally used to partially modified rounded acute angle, using a disc mill to a sand mill over a large area, a small place cooking filing, then finally from coarse to fine sandpaper slowly modified rounded shape, If the surface there is a large gap can be used to fill soil surface modified look, after modification to their satisfaction can begin colored.

結果 (英文) 2:

Using saw bow will be originally a sharp angle part of the decoration into rounded corners, first use the disc grinder a large area of grinding, smaller places can be a brocade, and finally use sandpaper from coarse to fine slowly the shape of the finishing round, if there is a large gap on the surface can use to retouch the surface decoration, decoration to their own satisfaction can start to color.

結果 (英文) 3:

Use a saw bow to modify the sharp corner into a round corner. First, use a disc sander to grind a large area, and then use a small place to file. Finally, use sandpaper to slowly modify the shape from coarse to fine. If there is a large gap on the surface, use a filling soil to modify the surface. After you are satisfied with the modification, you can start coloring.