In this measurement, the resonator

In this measurement, the resonator material had er=80.
The resonator was separated from a ground plane by a
spacer of thickness 1.59 mm and dielectric constant of
er=2.5. The resonator size was a=11.5 mm and h=10.3
mm. The measured and the computed impedances are
shown in Fig. 12.

結果 (中文) 1:

在此测量中，谐振器材料有呃 = 80。谐振器，从地平面的分离垫片厚度 1.59 毫米和介电常数呃 = 2.5。谐振腔大小 = 11.5 毫米和 h = 10.3mm。测量和计算的阻抗图 12 所示。

結果 (中文) 3:

在这个测量中，谐振器材料有二= 80。谐振器被一个接一个地平面隔开厚度1.59毫米和介电常数的间隔铒= 2.5。谐振器的大小为11.5毫米和10.3 =mm。测量和计算的阻抗是图12。