2号机尾座安装步骤及锯片间距测量同1号机。！注：轴头螺母及锁紧螺栓为右

2号机尾座安装步骤及锯片间距测量同1号机。！注：轴头螺母及锁紧螺栓为右旋。
2号机主轴增加一个中间支撑座。安装及卸下步骤如图；安装至第八张锯片时,按装中间座。螺丝A不要拧紧，锯片及隔套全部安装齐，锁紧尾座螺母C后再拧紧螺丝A.

結果 (英文) 1:

The 2nd the machine TAILSTOCK installation steps and blade pitch measurement with No. 1. ! Note: The spindle head and nut locking bolt is right-handed.
2 machine spindle adding an intermediate support base. Installation and removal procedure in Figure; installed to the eighth blade, the middle seat installation. The screws a Do not tighten the blade and spacer all installation Qi, and then tighten the screws a lock tailstock nut c.

結果 (英文) 2:

2 tail seat installation steps and saw blade spacing measurement with the No. 1 machine.!Note: the axle nut and a locking bolt is right.The
2 machine adds a middle supporting seat.Installation and unloading steps such as map; mounted to eighth saw blades, installed by the middle seat.Do not tighten screw A, saw blades and spacer sleeve are installed together, then tighten the locking screw A.
tail nut C

結果 (英文) 3:

2nd tower installation, tail, step machine, and saw blades spaced measurements with the 1th.! Note: the shaft nut and locking bolts for the right-handed. Machine spindle increases
2, an intermediate support. Installing and removing the steps in Figure; installed in the eighth when sawing, fit the middle seat. Do not tighten screws a, saw blade and spacer all align, locking nuts, block c, and then tighten the screw A.