采用一台30t吊机作为起吊设备，吊机采用不同的回转半径起吊罐体，直至移

采用一台30t吊机作为起吊设备，吊机采用不同的回转半径起吊罐体，直至移至安装位置，缓慢放下。人工调校使罐体每个立柱中心线位置对准预埋件就位，然后进行焊接。

結果 (英文) 1:

With a 30t crane lifting equipment, crane uses different RADIUS lift tank until the move to the installation location, slow down. Manual adjustment tank align the center line of each post location embedded parts in place, and then welded.

結果 (英文) 2:

Using a 30t crane as lifting equipment, hoists a different radius of gyration lifting body, until moved to the installation location, slow down. Manual adjustment so that the tank centerline alignment of each column embedded parts in place, and then welded.

結果 (英文) 3:

Using a 30t crane as lifting equipment, crane with different radius of gyration of the lifting body, until it moved to the installation position slow down. Manual calibration tank of each column center line alignment embedded in place, and then welding.