Then, tighten the top hinge screws.
Connect the connectors from the fridge door and the main unit.
Then, fix the wires on the inner hook of the optional hinge cover (L).
Insert the hinge cover in the top hinge with the right side first.
Then, press the bottom of the cover to fit.
CAUTION
Make sure all of the wires and connectors are not stuck in the middle.
Insert the top frame cover (4) with the part (b) fitting in the part (a) diagonally.
Then, slide the end of the cover to the left to lock.
For models that have the display panel on the top of the fridge, push in the left end of the top frame cover (4) then the right side by locking the lower and upper areas in this sequence.
Insert the optional space cover (L) in the fridge door.
Then, press to close the wire cover (1).
The space cover differs with the model.
RB37 glass door models only
Connect the dongle PBA connector (3).
Then, press to close the wire cover (1).
Close the fridge door and tighten the top screws of the door.
NOTE
You might want to return the doors to the initial position (before reversing the door).
In that case, refer to the instructions above but switch the doors, hinges, and covers back to the initial position.