Each equipment submitted for testing, where applicable, shall fulfil the requirements of the present document on all frequencies over which it is intended to operate.
Where appropriate testing should be carried out on suitable frequencies for the equipment concerned.
If an equipment is designed to operate with different carrier powers, measurements of each transmitter parameter shall
be performed at the highest power level at which the transmitter is intended to operate.
Additionally, technical documentation and operating manuals, sufficient to allow testing to be performed, shall be available.
A test fixture for equipment with an integral antenna may be supplied (see clause 6.3).
To simplify and harmonize the testing procedures between the different testing laboratories, measurements shall be performed, according to the present document, on samples of equipment defined in clauses 4.2.1 to 4.2.3.2.
These clauses are intended to give confidence that the requirements set out in the present document have been met without the necessity of performing measurements on all frequencies.