-I- Waiting ...-I- TCL platform : W

-I- Waiting ...
-I- TCL platform : Windows NT
-I- SAM-BA 2.12 on : windows
current connection is jlinkARM0, \jlink\ARM0 to be matched
-I- Retrieved arguments from command line :
-I- argv 0 : jlinkARM0
-I- argv 1 : AT91SAMa5d3x-EK
-I- argv 2 : sama5d3xek_demo_linux_nandflash.tcl
0
jlinkARM0
-I- Connection : jlinkARM0 (target(comType) = 2)
-I- Board : at91sama5d3x-ek
-I- Traces Level : 4
-I- target(handle) : 19583032
Read device Chip ID at 0xfffff240 --- get 0x00000000
Read device Chip ID at 0xffffee40 --- get 0x8a5c07c2
-I- Found processor : at91sama5d3x (Chip ID : 0x8a5c07c2)
sourcing device file C:/Program Files/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/devices/at91sama5d3x.tcl
sourcing board description file C:/Program Files/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/at91sama5d3x-ek/at91sama5d3x-ek.tcl
-I- Loading applet applet-lowlevelinit-sama5d3x.bin at address 0x308000
-I- Memory Size : 0x2 bytes
-I- Buffer address : 0x4
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- Low level initialized
-I- External RAM Settings : extRamVdd=0, extRamType=1, extRamDataBusWidth=16, extDDRamModel=1
-I- Loading applet applet-extram-sama5d3x.bin at address 0x308000
-I- Memory Size : 0x8000000 bytes
-I- Buffer address : 0x308B0C
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- External RAM initialized
-I- Command line mode : Execute script file : sama5d3xek_demo_linux_nandflash.tcl
-I- Chip variant is sama5d34
-I- Board variant is ek
-I- === Initialize the NAND access ===
-I- NANDFLASH::Init (trace level : 4)
-I- Loading applet applet-nandflash-sama5d3x.bin at address 0x20000000
-I- Memory Size : 0x20000000 bytes
-I- Buffer address : 0x2001052C
-I- Buffer size: 0x20000 bytes
-I- Applet initialization done
-I- === Enable PMECC OS Parameters ===
- HEADER value is 0xC0902405
-I- Pmecc header configration successful
-I- PMECC configure c0902405
-I- === Erase all the NAND flash blocs and test the erasing ===
-I- GENERIC::EraseAll
-I- === Load the bootstrap: nandflash_at91sam9-ek in the first sector ===
Sending boot file done.
-I- === Load the u-boot in the next sectors ===
-I- Send File u-boot.bin at address 0x00040000
GENERIC::SendFile u-boot.bin at address 0x40000
-I- File size : 0x4B290 byte(s)
-I- Complete 0%
-I- Writing: 0x20000 bytes at 0x40000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 42%
-I- Writing: 0x20000 bytes at 0x60000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 85%
-I- Writing: 0xB290 bytes at 0x80000 (buffer addr : 0x2001052C)
-I- 0xB290 bytes written by applet
-I- === Load the u-boot environment variables ===
-I- Send File uboot-env.bin at address 0x000c0000
GENERIC::SendFile uboot-env.bin at address 0xC0000
-I- File size : 0x20000 byte(s)
-I- Complete 0%
-I- Writing: 0x20000 bytes at 0xC0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- === Load the Kernel image and device tree database ===
-I- Send File sama5d34ek.dtb at address 0x00180000
GENERIC::SendFile sama5d34ek.dtb at address 0x180000
-I- File size : 0x57D7 byte(s)
-I- Complete 0%
-I- Writing: 0x57D7 bytes at 0x180000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Send File uImage at address 0x00200000
GENERIC::SendFile uImage at address 0x200000
-I- File size : 0x353290 byte(s)
-I- Complete 0%
-I- Writing: 0x20000 bytes at 0x200000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 3%
-I- Writing: 0x20000 bytes at 0x220000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 7%
-I- Writing: 0x20000 bytes at 0x240000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 11%
-I- Writing: 0x20000 bytes at 0x260000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 15%
-I- Writing: 0x20000 bytes at 0x280000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 18%
-I- Writing: 0x20000 bytes at 0x2A0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 22%
-I- Writing: 0x20000 bytes at 0x2C0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 26%
-I- Writing: 0x20000 bytes at 0x2E0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 30%
-I- Writing: 0x20000 bytes at 0x300000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 33%
-I- Writing: 0x20000 bytes at 0x320000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 37%
-I- Writing: 0x20000 bytes at 0x340000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 41%
-I- Writing: 0x20000 bytes at 0x360000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 45%
-I- Writing: 0x20000 bytes at 0x380000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 48%
-I- Writing: 0x20000 bytes at 0x3A0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 52%
-I- Writing: 0x20000 bytes at 0x3C0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 56%
-I- Writing: 0x20000 bytes at 0x3E0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 60%
-I- Writing: 0x20000 bytes at 0x400000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 63%
-I- Writing: 0x20000 bytes at 0x420000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 67%
-I- Writing: 0x20000 bytes at 0x440000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 71%
-I- Writing: 0x20000 bytes at 0x460000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 75%
-I- Writing: 0x20000 bytes at 0x480000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 78%
-I- Writing: 0x20000 bytes at 0x4A0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 82%
-I- Writing: 0x20000 bytes at 0x4C0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 86%
-I- Writing: 0x20000 bytes at 0x4E0000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 90%
-I- Writing: 0x20000 bytes at 0x500000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 93%
-I- Writing: 0x20000 bytes at 0x520000 (buffer addr : 0x2001052C)
-I- 0x20000 bytes written by applet
-I- Complete 97%
-I- Writing: 0x13290 bytes at 0x540000 (buffer addr : 0x2001052C)
-I- 0x13290 bytes written by applet
-I- === Enable trimffs ===
-I- === Load the linux file system ===
could not read "ubi_rootfs.img": no such file or directory
-I- === DONE. ===

-I- Waiting ...
-I- TCL platform : Windows NT
-I- SAM-BA 2.12 on : windows
current connection is jlinkARM0, \jlink\ARM0 to be matched 
-I- Retrieved arguments from command line :
-I- argv 0 : jlinkARM0
-I- argv 1 : AT91SAMa5d3x-EK
-I- argv 2 : sama5d3xek_demo_linux_nandflash.tcl
0
jlinkARM0
-I- Connection : jlinkARM0 (target(comType) = 2)
-I- Board : at91sama5d3x-ek
-I- Traces Level : 4
-I- target(handle) : 19583032
Read device Chip ID at 0xfffff240 --- get 0x00000000
Read device Chip ID at 0xffffee40 --- get 0x8a5c07c2
-I- Found processor : at91sama5d3x (Chip ID : 0x8a5c07c2)
sourcing device file C:/Program Files/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/devices/at91sama5d3x.tcl
sourcing board description file C:/Program Files/Atmel/sam-ba_2.12/sam-ba.exe/../tcl_lib/at91sama5d3x-ek/at91sama5d3x-ek.tcl
-I- Loading applet applet-lowlevelinit-sama5d3x.bin at address 0x308000
-I- Memory Size : 0x2 bytes
-I- Buffer address : 0x4
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- Low level initialized
-I- External RAM Settings : extRamVdd=0, extRamType=1, extRamDataBusWidth=16, extDDRamModel=1
-I- Loading applet applet-extram-sama5d3x.bin at address 0x308000
-I- Memory Size : 0x8000000 bytes
-I- Buffer address : 0x308B0C
-I- Buffer size: 0x0 bytes
-I- Applet initialization done
-I- External RAM initialized
-I- Command line mode : Execute script file : sama5d3xek_demo_linux_nandflash.tcl
-I- Chip variant is sama5d34
-I- Board variant is ek
-I- === Initialize the NAND access ===
-I- NANDFLASH::Init (trace level : 4)
-I- Loading applet applet-nandflash-sama5d3x.bin at address 0x20000000
-I- Memory Size : 0x20000000 bytes
-I- Buffer address : 0x2001052C
-I- Buffer size: 0x20000 bytes
-I- Applet initialization done
-I- === Enable PMECC OS Parameters ===
 - HEADER value is 0xC0902405
-I- Pmecc header configration successful
-I- PMECC configure c0902405
-I- === Erase all the NAND flash blocs and test the erasing ===
-I- GENERIC::EraseAll
-I- === Load the bootstrap: nandflash_at91sam9-ek in the first sector ===
Sending boot file done.
-I- === Load the u-boot in the next sectors ===
-I- Send File u-boot.bin at address 0x00040000
GENERIC::SendFile u-boot.bin at address 0x40000
-I- File size : 0x4B290 byte(s)
-I- Complete 0%
-I-  Writing: 0x20000 bytes at 0x40000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 42%
-I-  Writing: 0x20000 bytes at 0x60000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 85%
-I-  Writing: 0xB290 bytes at 0x80000 (buffer addr : 0x2001052C)
-I-  0xB290 bytes written by applet
-I- === Load the u-boot environment variables ===
-I- Send File uboot-env.bin at address 0x000c0000
GENERIC::SendFile uboot-env.bin at address 0xC0000
-I- File size : 0x20000 byte(s)
-I- Complete 0%
-I-  Writing: 0x20000 bytes at 0xC0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- === Load the Kernel image and device tree database ===
-I- Send File sama5d34ek.dtb at address 0x00180000
GENERIC::SendFile sama5d34ek.dtb at address 0x180000
-I- File size : 0x57D7 byte(s)
-I- Complete 0%
-I-  Writing: 0x57D7 bytes at 0x180000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Send File uImage at address 0x00200000
GENERIC::SendFile uImage at address 0x200000
-I- File size : 0x353290 byte(s)
-I- Complete 0%
-I-  Writing: 0x20000 bytes at 0x200000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 3%
-I-  Writing: 0x20000 bytes at 0x220000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 7%
-I-  Writing: 0x20000 bytes at 0x240000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 11%
-I-  Writing: 0x20000 bytes at 0x260000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 15%
-I-  Writing: 0x20000 bytes at 0x280000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 18%
-I-  Writing: 0x20000 bytes at 0x2A0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 22%
-I-  Writing: 0x20000 bytes at 0x2C0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 26%
-I-  Writing: 0x20000 bytes at 0x2E0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 30%
-I-  Writing: 0x20000 bytes at 0x300000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 33%
-I-  Writing: 0x20000 bytes at 0x320000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 37%
-I-  Writing: 0x20000 bytes at 0x340000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 41%
-I-  Writing: 0x20000 bytes at 0x360000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 45%
-I-  Writing: 0x20000 bytes at 0x380000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 48%
-I-  Writing: 0x20000 bytes at 0x3A0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 52%
-I-  Writing: 0x20000 bytes at 0x3C0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 56%
-I-  Writing: 0x20000 bytes at 0x3E0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 60%
-I-  Writing: 0x20000 bytes at 0x400000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 63%
-I-  Writing: 0x20000 bytes at 0x420000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 67%
-I-  Writing: 0x20000 bytes at 0x440000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 71%
-I-  Writing: 0x20000 bytes at 0x460000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 75%
-I-  Writing: 0x20000 bytes at 0x480000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 78%
-I-  Writing: 0x20000 bytes at 0x4A0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 82%
-I-  Writing: 0x20000 bytes at 0x4C0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 86%
-I-  Writing: 0x20000 bytes at 0x4E0000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 90%
-I-  Writing: 0x20000 bytes at 0x500000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 93%
-I-  Writing: 0x20000 bytes at 0x520000 (buffer addr : 0x2001052C)
-I-  0x20000 bytes written by applet
-I- Complete 97%
-I-  Writing: 0x13290 bytes at 0x540000 (buffer addr : 0x2001052C)
-I-  0x13290 bytes written by applet
-I- === Enable trimffs ===
-I- === Load the linux file system ===
could not read "ubi_rootfs.img": no such file or directory
-I- === DONE. ===

0/5000

原始語言: -

目標語言: -

結果 (中文) 1: [復制]

復制成功！

-I-正在等待...-I-TCL 平台: Windows NT-I-山姆坝 2.12 上: windows当前连接是 jlinkARM0，\jlink\ARM0 要匹配-I-检索参数从命令行:-I-argv 0: jlinkARM0-I-argv 1: AT91SAMa5d3x-EK-I-argv 2: sama5d3xek_demo_linux_nandflash.tcl0jlinkARM0-I-连接: jlinkARM0 (target(comType) = 2)-I-板: at91sama5d3x-ek-I-跟踪级别: 4-I-target(handle): 19583032读取设备芯片 ID 在 0xfffff240---得到 0x00000000读取设备芯片 ID 0xffffee40---在得到 0x8a5c07c2-I-发现处理器: at91sama5d3x (芯片 ID: 0x8a5c07c2)采购设备文件 c: / 程序 Files/Atmel/sam-ba_2.12/sam-ba.exe/。/tcl_lib/devices/at91sama5d3x.tcl采购审计委员会说明文件 c: / 程序 Files/Atmel/sam-ba_2.12/sam-ba.exe/。/tcl_lib/at91sama5d3x-ek/at91sama5d3x-ek.tcl-I-加载 applet 小程序-lowlevelinit-sama5d3x.bin 地址 0x308000-I-内存大小: 0x2 字节-I-缓冲区地址: 0x4-I-缓冲区大小: 0x0 字节-I-小程序初始化完成-I-低级别初始化-I-外部 RAM 设置: extRamVdd = 0，extRamType = 1，extRamDataBusWidth = 16，extDDRamModel = 1-I-加载 applet 小程序-乳腺-sama5d3x.bin 在地址 0x308000-I-内存大小: 0x8000000 字节-I-缓冲区地址: 0x308B0C-I-缓冲区大小: 0x0 字节-I-小程序初始化完成-I-外部 RAM 初始化-I-命令行模式: 执行脚本文件: sama5d3xek_demo_linux_nandflash.tcl-I-芯片备选案文是 sama5d34-I-板变形是 ek-I-= = = 初始化 NAND 访问 = = =-I-NANDFLASH::Init (跟踪级别: 4)-I-加载 applet 小程序-nandflash-sama5d3x.bin 地址 0x20000000-I-内存大小: 0x20000000 字节-I-缓冲区地址: 0x2001052C-I-缓冲区大小: 0x20000 字节-I-小程序初始化完成-I-= = = 启用 PMECC 操作系统参数 = = =标头值是 0xC0902405-I-Pmecc 头配置成功-I-PMECC 配置 c0902405-I-= = = 抹去所有 NAND 闪存集团和测试擦除 = = =-I-GENERIC::EraseAll-I-= = = 加载引导: nandflash_at91sam9-ek 的第一个扇区 = = =发送完成的引导文件。-I-= = = 加载 u 引导下一部门 = = =-I-发送文件 u boot.bin 0x00040000 的地址GENERIC::SendFile u boot.bin 地址 0x40000-I-文件大小: 0x4B290 字节-I-完成 0%-我-写作: 0x40000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 42%-我-写作: 0x60000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 85%-我-写作: 0x80000 0xB290 字节 (缓冲区地址: 0x2001052C)-我-0xB290 字节写的小程序-I-= = = 加载 u 引导环境变量 = = =-I-0x000c0000 地址发送文件 uboot-env.binGENERIC::SendFile uboot env.bin 在 0xC0000 地址-I-文件大小: 0x20000 字节-I-完成 0%-我-写作: 0xC0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-= = = 加载内核映像和设备树数据库 = = =-I-在地址 0x00180000 发送文件 sama5d34ek.dtb在地址 0x180000 GENERIC::SendFile sama5d34ek.dtb-I-文件大小: 0x57D7 字节-I-完成 0%-我-写作: 0x180000 0x57D7 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-0x00200000 地址发送文件 uImage在地址 0x200000 GENERIC::SendFile uImage-I-文件大小: 0x353290 字节-I-完成 0%-我-写作: 0x200000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 3%-我-写作: 0x220000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 7%-我-写作: 0x240000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 11%-我-写作: 0x260000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 15%-我-写作: 0x280000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 18%-我-写作: 0x2A0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 22%-我-写作: 0x2C0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 26%-我-写作: 0x2E0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 30%-我-写作: 0x300000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 33%-我-写作: 0x320000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 37%-我-写作: 0x340000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 41%-我-写作: 0x360000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 45%-我-写作: 0x380000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 48%-我-写作: 0x3A0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 52%-我-写作: 0x3C0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 56%-我-写作: 0x3E0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 60%-我-写作: 0x400000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 63%-我-写作: 0x420000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 67%-我-写作: 0x440000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 71%-我-写作: 0x460000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 75%-我-写作: 0x480000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 78%-我-写作: 0x4A0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 82%-我-写作: 0x4C0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 86%-我-写作: 0x4E0000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 90%-我-写作: 0x500000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 93%-我-写作: 0x520000 0x20000 字节 (缓冲区地址: 0x2001052C)-我-0x20000 字节写的小程序-I-完成 97%-我-写作: 0x540000 0x13290 字节 (缓冲区地址: 0x2001052C)-我-0x13290 字节写的小程序-I-= = = 启用 trimffs = = =-I-= = = 加载 linux 文件系统 = = =看不到"ubi_rootfs.img": 没有这样的文件或目录-I-= = = 做。===

正在翻譯中..

結果 (中文) 2:[復制]

復制成功！

正在翻譯中..

結果 (中文) 3:[復制]

復制成功！

我在等待…
-我- TCL平台：Windows NT
-我- sam-ba 2.12：Windows
当前连接 JLINK arm0，\ \ arm0 JLINK要匹配
-我-检索参数从命令行：
-我- argv 0： arm0 JLINK
-我at91sama5d3x argv 1：EK
-我- argv 2：sama5d3xek_demo_linux_nandflash。TCL
0
JLINK arm0
-我-连接： arm0 JLINK（目标（ComType）= 2）
-我-板：at91sama5d3x EK
我痕迹的水平：4
-我-目标（处理）：19583032
读0xfffff240 --- ID芯片得到0x00000000
读0xffffee40 --- ID芯片得到0x8a5c07c2
-我发现：at91sama5d3x处理器（芯片ID：0x8a5c07c2）
采购设备文件C：/程序文件/公司/ sam-ba_2.12 /山姆巴。EXE / / tcl_lib /设备/ at91sama5d3x。TCL
采购板描述文件/程序文件/公司/ sam-ba_2.12 /山姆巴。EXE / ../ tcl_lib / at91sama5d3x EK / at91sama5d3x EK。TCL
-我-在地址0x308000
-我-内存大小加载程序applet-lowlevelinit-sama5d3x.bin：0x2字节
-我-缓冲区地址：0x4
-我-缓冲区大小：0字节
-我-程序初始化完成
-我-低电平初始化
-我-外部RAM的设置：extramvdd = 0，extramtype = 1，extramdatabuswidth = 16，extddrammodel = 1
-我-加载程序applet-extram-sama5d3x。本在地址0x308000
-我-内存大小：0x8000000字节
-我-缓冲区地址：0x308b0c
-我-缓冲区大小：0字节
-我-程序初始化完成
-我-外部RAM初始化
-我-命令行模式：执行脚本文件：sama5d3xek_demo_linux_nandflash TCL
-我-芯片。变异是sama5d34
-我-板变体是EK
我= = = = = =初始化NAND访问
-我- NandFlash：：init（微量水平：4）
我在地址0x20000000
-我-内存大小加载程序applet-nandflash-sama5d3x.bin：0x20000000字节
-我-缓冲区地址：0x2001052c
-我-缓冲区的大小，0x20000字节
-我-程序初始化完成
我= = = = = =使pmecc OS参数
-标题值0xc0902405
-我pmecc头配置成功
-我- pmecc配置c0902405
我= = =擦除所有NAND闪存擦除= =集团和测试=
-我-通用：：EraseAll
-我- = = =加载引导：nandflash_at91sam9-ek在第一宫= = =
发送启动文件了。
-我- = = =负载U-Boot在下一个环节= = =
-我-发送文件u-boot.bin地址0x00040000
通用：：sendfile u-boot.bin地址0x40000
-我-文件大小：0x4b290字节（S）
我完成0%
我写作：0x20000字节0x40000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成42%
我写：0x20000字节0x60000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成85%
我写：0xb290字节在0x80000（缓冲区地址：0x2001052c）
-我- 0xb290字节写的小程序
我= = = = =负载U-boot环境变量=
我在0x000c0000
通用地址发送文件uboot-env.bin：：sendfile uboot-env.bin地址0xc0000
-我-文件大小：0x20000字节（S）
我完成0%
我写作：0x20000字节0xc0000（缓冲区地址：0x2001052c）
-我- 0x20000字节写的小程序
-我= = =加载内核映像和设备树= = =
数据库-我-发送文件sama5d34ek.dtb地址0x00180000
通用：：sendfile sama5d34ek。DTB地址0x180000
-我-文件大小：0x57d7字节（S）
我完成0%
我写作：0x57d7字节0x180000（缓冲区地址：0x2001052c）
-我- 0x20000字节写的小程序
-我-发送文件uImage地址0x00200000
通用：：在sendfile uImage地址0x200000
-我-文件大小：0x353290字节（S）
我完成0%
我写作：0x20000字节0x200000（缓冲区地址：0x2001052c）
我0x20000字节的程序
我完成3%
我写：0x20000字节0x220000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成7%
我写：0x20000字节0x240000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成11%
我写：0x20000字节0x260000（缓冲区地址：0x2001052c）
-我- 0x20000字节写的小程序
我完成15%
我写作：0x20000字节0x280000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成18%
我写：0x20000字节0x2a0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
-我-完成22%
我写：0x20000字节0x2c0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成26%
我写作：0x20000字节0x2e0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成30%
我写：0x20000字节0x300000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成33%
我写：0x20000字节在0x320000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成37%
我写作：0x20000字节0x340000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成41%
我写：0x20000字节0x360000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成45%
我写：0x20000字节在0x380000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成48%
我写作：0x20000字节0x3a0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成52%
我写：0x20000字节0x3c0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成56%
我写：0x20000字节在0x3e0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成60%
我写作：0x20000字节0x400000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成63%
我写：0x20000字节0x420000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成67%
我写：0x20000字节在0x440000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成71%
我写作：0x20000字节0x460000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成75%
我写：0x20000字节0x480000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成78%
我写：0x20000字节在0x4a0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成82%
我写作：0x20000字节0x4c0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成86%
我写：0x20000字节0x4e0000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成90%
我写：0x20000字节在0x500000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成93%
我写作：0x20000字节0x520000（缓冲区地址：0x2001052c）
-我- 0x20000字节的程序
我完成97%
我写：0x13290字节0x540000（缓冲区地址：0x2001052c）
-我- 0x13290字节写的小程序
我= = = = = =
-使trimffs我= = =负载的Linux文件系统= = =
不能读“ubi_rootfs。IMG”：没有这样的文件或目录
-我- = = =做。= =

正在翻譯中..

其它語言

本翻譯工具支援: 世界語, 中文, 丹麥文, 亞塞拜然文, 亞美尼亞文, 伊博文, 俄文, 保加利亞文, 信德文, 偵測語言, 優魯巴文, 克林貢語, 克羅埃西亞文, 冰島文, 加泰羅尼亞文, 加里西亞文, 匈牙利文, 南非柯薩文, 南非祖魯文, 卡納達文, 印尼巽他文, 印尼文, 印度古哈拉地文, 印度文, 吉爾吉斯文, 哈薩克文, 喬治亞文, 土庫曼文, 土耳其文, 塔吉克文, 塞爾維亞文, 夏威夷文, 奇切瓦文, 威爾斯文, 孟加拉文, 宿霧文, 寮文, 尼泊爾文, 巴斯克文, 布爾文, 希伯來文, 希臘文, 帕施圖文, 庫德文, 弗利然文, 德文, 意第緒文, 愛沙尼亞文, 愛爾蘭文, 拉丁文, 拉脫維亞文, 挪威文, 捷克文, 斯洛伐克文, 斯洛維尼亞文, 斯瓦希里文, 旁遮普文, 日文, 歐利亞文 (奧里雅文), 毛利文, 法文, 波士尼亞文, 波斯文, 波蘭文, 泰文, 泰盧固文, 泰米爾文, 海地克里奧文, 烏克蘭文, 烏爾都文, 烏茲別克文, 爪哇文, 瑞典文, 瑟索托文, 白俄羅斯文, 盧安達文, 盧森堡文, 科西嘉文, 立陶宛文, 索馬里文, 紹納文, 維吾爾文, 緬甸文, 繁體中文, 羅馬尼亞文, 義大利文, 芬蘭文, 苗文, 英文, 荷蘭文, 菲律賓文, 葡萄牙文, 蒙古文, 薩摩亞文, 蘇格蘭的蓋爾文, 西班牙文, 豪沙文, 越南文, 錫蘭文, 阿姆哈拉文, 阿拉伯文, 阿爾巴尼亞文, 韃靼文, 韓文, 馬來文, 馬其頓文, 馬拉加斯文, 馬拉地文, 馬拉雅拉姆文, 馬耳他文, 高棉文, 等語言的翻譯.