从2013.11至2015.3期间 在湖北行星传动设备有限公司从事技术

从2013.11至2015.3期间 在湖北行星传动设备有限公司从事技术工艺工作。主要从事行星减速机（模数0.5至2）零件加工及装配相关工作；
担任职务：担当工艺部部长（从2013年11月至2015.3）。
一、工作职责：
1、工艺、作业标准书、自检表，毛坯图（铸件和锻件）和工装设计等事宜的校对或审核；
2、技术部日常工作安排及部门之间的协调工作；
3、现场问题的主要参与和解决者。
二、主要工作：
1、设备选型及技术确认。比如：根据齿轮产能规划，对齿轮生产线相关设备的选型及技术确认，包括对加工达到什么精度的零件，所选什么品牌精度车床及加工中心。
2、设备验收
3、设备回司后工艺打通，此项工作最为核心。比如：小模数齿轮在加工过程出现各种问题的解决。
4、以下为小模数行星减速机几大核心零件加工疑难问题的解决。
a、齿圈加工：最终齿圈齿轮检测报告达6级标准。
b、齿轮加工：齿轮检测报告可达到3~6级标准.
c、行星架位置度可达到0.01mm左右。
d、输入轴和前后法兰变形相对以前加工（湖北行星）有较大改善。
5、齿圈外表面的处理：根据客户对产品质量不断提高，齿圈表面处理由喷塑→发黑→喷漆→镀镍最终验证过程。
6、小模数行星减速机各零件标准工艺制定（含刀具、夹具）及实施。
7、毛坯降成本有显著成效。
8、每天应对各类问题的处理。

結果 (中文) 3:

From 2013.11 to 2015.3 during the period of working in Hubei in the process of planetary transmission equipment Co., ltd.. Mainly engaged in planetary reducer (0.5 to 2 AD) parts processing and assembly work;
positions: Minister play process (from 2013 to November 2015.3). Job responsibilities: A,
1, process, work instructions, checklist, blank map (casting and forging) design issues and proofreading and review; coordination between
2, technical department daily work arrangements and departments; mainly involved in the
3 field, and solve the problem. The main work:

two, confirmed 1, selection of equipment and technology. For example:According to the gear capacity planning, confirm the selection and technology of gear production line equipment, including the processing of precision parts to what, what brand of selected precision lathe and machining center.
2
3, the acceptance of the equipment, equipment back to the company after the process is open, the core of the work. Such as: small module gear appears to solve all kinds of problems in the process.
4, following in order to solve the low modulus of planetary gear reducer with several core parts processing problems.
A, gear processing: the final gear up to 6 standard test report.
B, gear processing: gear inspection report can reach the standard of 3~6. C, position of the planet shelf degree can reach 001mm or so.
D, the input shaft and flange deformation before and after processing (relative to the previous Hubei planet) have been greatly improved.
5, the outer surface of the tooth circle: according to the customer to improve product quality, the ring gear surface treatment by spraying, painting, plating, blackening the final validation process.
6, making small modulus planetary reducer parts standard process (including tool, fixture) and its implementation.
7, blank cost effectiveness. 8, to deal with various matters.