5. ConclusionThe main reason of scr

5. Conclusion
The main reason of scrap in cold runner system of injection molding is the feeding system which consists of sprue, runner and gate system. Runner has different cross sections for different applications. In this study, new geometry of runner system with elliptical cross section in comparison with round cross section was successfully developed for injecting two circular plates with thickness 1mm. filling time, melt temperature; mold temperature; pressure holding time and pure cooling time are evaluated as process parameters.

結果 (中文) 1:

5.结论报废冷流道系统中的主要原因是注塑的进给系统由主流道，分流道和浇口系统组成。赛跑运动员有不同截面为不同的应用程序。在此研究中，新几何与圆形截面椭圆截面的热流道系统的研制成功为注射两个圆板厚度、 熔体温度; 1 毫米。 充模时间模具温度;压力保持时间和纯的冷却时间被评为工艺参数。

結果 (中文) 3:

5。结论在注塑成型冷流道系统报废的主要原因是进给系统由主流道，分流道和浇口系统。不同的应用程序有不同的横截面。在这项研究中，在圆形截面比较椭圆截面流道系统几何新研制成功的注射两圆板厚度为1mm。作为工艺参数，在填充时间，熔体温度，模具温度，压力保持时间和冷却时间进行评估。