Changing makeup color or the color of anything in Photoshop for the ma的中文翻譯

Changing makeup color or the color

Changing makeup color or the color of anything in Photoshop for the matter doesn't have to be a challenging task, although it can be very easy to mess up. In this tutorial I will show you three different ways of changing makeup color in Photoshop.

However, these techniques can be used to change the color of any portion of your image portrait or otherwise. The techniques in the video will range from quick methods that beginner Photoshopers users can use to the more advanced techniques retouchers can make use of.



Method 1: Curves

Curves in my opinion is one of the fundamental tools of Adobe Photoshop, it always you to do major changes of different kinds to your image, from dodging and burning to color correction. For this process remember that you are going to want to mask out or mask in the area you want to affect. Since we are changing makeup color we only want to target the one area. If you are trying to change multiple areas then I would recommend using separate adjustment layers for each section.

First you will need to understand your complimentary colors when working with Curves. You will have the option of either altering the "Red", "Green", or "Blue" color channels, but when you do so, you won't only be able to introduce or remove those colors, you will also be altering the complimentary colors. So remember the following:

Removing Red increases Cyan

Removing Green increases Magenta

Removing Blue increases Yellow

You will also probably recognize these additive color opposites – Cyan, Magenta, and Yellow – as the "CMY" in CMYK. If you have studied additive and subtractive color you also know that RGB is an additive process and CMYK is a subtractive process, so it can also be intuitive to a degree that we can add Cyan, Magenta, and Yellow, by subtracting Red, Green, and Blue.

By going into each channel in the Curves adjustment you can mix the exact color that you are looking for. In the video you will see how I go into each channel and make slight adjustments until I have the desired color.

Blending Mode

The Blending Mode you choose for your color adjustment will also play a large part in how the adjustment affects your image. In Normal blending more the adjustment will affect the hue, saturation, and luminosity of the base layer. If you change the blending mode to Color then it will only affect the hue and saturation, and finally if you change the blending mode to Hue, it will only affect the hue. In the video you will get to see how each blending mode changes the appearance of the adjustment layer, I also give my recommendation for which one to use.




With only a few more touches to be done with dodging and burning, you can see the makeup change and also basic skin tone changes with this before and after.
Method 2: Channel Mixer

Channel Mixer is the one method that will come with a warning. It gives you a lot of control to completely re-write the output channel information, but it is also really easy to wind up with an overdone result that is overly saturated and can destroy a lot of the value information for that particular area. If done well however, Channel Mixer can be really great. I would recommend for beginning Photoshopers to maybe experiment with this one, but not to make it their go-to method quite yet.

With Channel Mixer, you will have the option of selecting the Output Channel, as you can see on the graphic above. The red channel will default to being 100 percent red and zero percent green and blue. The green and blue channels will also default to being 100 percent green or blue respectively. You then have the option completely changing the amount of red, green, and blue that will comprise each channel.

In the video above you will see how you can quickly mess up the area you are trying to change, but also how you can change the output channels to get a very customized appearance.

Also remember to look at the blending mode of the Adjustment Layer. Again, look at the Color and Hue blending modes and decide which gives you the better result. You can also take the opacity of the adjustment layer down, if you don't want the change to be quite as strong. I like to usually pull down these types of changes by 10 to 20 percent.

Method 3: Hue/Saturation


For this particular image, Hue and Saturation is probably my favorite. As you can see in the graphic directly above, there is a small Colorize check box. Select Colorize when doing this and instead of tweaking the hue of the current area, you will actually be able to select the exact hue that you want and it will overlay it on the selected area. Hue and Saturation is a very efficient way of working. You will see in the video that it only takes seconds for me to find the hue that I want and then slightly tweak the saturation as well. I would also recommend leaving the lightness alone, as you don't want to change the luminosity of the area (especially for something like eye makeup) because the areas of skin around it will have the original luminosity and the effect will clearly look fake.

In the graphic of the Hue/Saturation properties window, you can see the exact settings I used. I chose 268 as my hue and then bumped the saturation up just slightly to 34, but it is important to remember that this isn't a recipe to be followed, it a concept that you can apply to your image, so select and tweak the values that best suit your image!

Also remember to look at the blending mode and opacity of the adjustment layer once you are done. Even though I bumped the saturation of the affect I still decreased the opacity just a bit.

Mixing and Stacking
My actual final result that you see in the banner image was not done by using just one of these methods. I actually combined and stacked a few of them with different blending modes and opacity levels to get exactly what I wanted. I highly encourage you guys, whenever you read or watch a tutorial, to experiment and make the techniques your own!
0/5000
原始語言: -
目標語言: -
結果 (中文) 1: [復制]
復制成功!
更改颜色的东西在 Photoshop 中的一件事或化妆颜色并不一定要富有挑战性的任务,虽然它可以很容易搞砸。在本教程中,我会告诉你三种不同方式的改变化妆颜色在 Photoshop 中。然而,这些技术可以用来改变你的形象肖像的任何部分的颜色或其他行为。在视频技术的范围可以从快速方法 Photoshopers 用户可以使用到更高级的初学者技术修图师可以使用。 方法 1: 曲线在我看来曲线是 Adobe Photoshop 的基本工具之一它总是你做重大的不同种类的变化对你的形象,从躲避和燃烧到色彩校正。这一进程请记住,你要想要通过使用蒙版或掩盖在你想要影响的地区。因为我们正在改变化妆颜色我们只想要一个地区的目标。如果你试图更改多个区域然后我建议为每个部分使用单独的调整图层。首先你需要了解你免费的颜色,使用曲线时。你将可以选择要么改变"红"、"绿色"、"蓝"的颜色通道,但当你这么做,你不会只能够介绍或删除那些颜色,你也将改变的免费的颜色。所以请记住以下内容:删除红色增加青色删除绿色增加洋红色删除蓝色增加黄色你也可能会作为"CMY"cmyk 认可 — — 青色、 洋红色和黄色 — — 这些添加剂颜色对立。如果你学过加法、 减法的颜色,你也知道 RGB 是一个累加过程和 CMYK 是消减的过程,所以它也可以直观的程度,我们可以加上青色、 洋红色和黄色,减去红色、 绿色和蓝色。通过在曲线调整每个通道中,你可以混合你正在寻找的确切颜色。在视频中你会看到怎么样每个通道中,并且做轻微的调整,直到我拥有所需的颜色。混合模式你选择你的颜色调整的混合模式也将发挥很大一部分的调整是如何影响你的形象。在正常混合更多的调整将影响色相、 饱和度和亮度的基底图层。如果您更改混合模式,它的颜色然后将仅影响的色相和饱和度,和最后如果你将混合模式更改为色调,它只会影响色调。在视频中你会看到每种混合模式是如何变化的调整图层,外观我也给我建议使用哪一个。 只有几个更多触球避开与燃烧做,你可以看到化妆变化和也基本皮肤色调变化与这之前和之后。方法 2: 通道混合器通道混合器是会有一个警告的方法之一。它给您大量的控制完全重写输出信道信息,但它也是真的很容易过头的结果是过于饱和,可以摧毁大量的那一特定区域的价值信息风。如果做的很好但是,通道混合器可真的很棒。我建议开始 Photoshopers 也许实验与这一个,但不是能使他们走到方法尚未。通道混合器,你将有选择的输出通道,如你可以看到上面的图形。红色通道将默认为 100%红和零百分比绿色和蓝色。绿色和蓝色通道还会默认分别为 100%绿色或蓝色。然后,您可以完全更改的红色、 绿色和蓝色包含每个通道数量。在上面的视频你会看到如何你可以很快陷入困境的地区你正在改变,但如何您可以更改输出渠道来获取深度定制的外观。也别忘了看看调整图层的混合模式。又在此基础上,看看颜色和色调混合模式,决定让你有更好的结果。您还可以调整图层的不透明度降低,如果你不想变化相当的强劲。我想通常拉下来这些类型的更改由 10 至 20%。方法 3: 色相/饱和度对于此特定的映像,色相和饱和度可能是我的最爱。正如你可以看到图形直接上文中,还有一个小的着色复选框。选择着色,在这样的时候,而不是调整色调的当前区域,你将实际上能够选择你想要的确切色调和它会将它叠加在所选区域。色相和饱和度是工作的一种非常有效方式。在视频中,您将看到它只需为我找到我想要然后稍微调整饱和度以及色调秒。我也建议您保留明度独自一人,因为你不想要改变区域的亮度 (尤其是对眼部化妆之类),因为皮肤周围的地区将原始明度和效果显然会假。在色相/饱和度属性窗口的图形,你可以看到我所使用的确切设置。我选择 268 作为我的色调,然后撞到了饱和略到 34 名,但很重要的要记住,这不是应遵循食谱,它一个概念,你可以应用到你的形象,所以选择和调整最适合你的图像的值!此外记得来看看混合模式和不透明度的调整图层,一旦你做。即使我撞到了饱和的影响却仍然只是有点降低不透明度。混合和叠加你看到在横幅图片我实际的最终结果不是通过使用这些方法之一。我实际上结合和堆放其中数与不同的混合模式和不透明度级别得到自己想要什么。我非常鼓励你们这些家伙,每当您阅读或观看教程,来做实验、 做技术你自己!
正在翻譯中..
結果 (中文) 3:[復制]
復制成功!
换妆颜色或为此事不在PS图象处理软件什么颜色都是一个具有挑战性的任务,虽然它可以很容易搞砸。在这个教程中,我将向你展示三种不同的颜色PS图象处理软件改变化妆方式。

然而,这些技术可以用来改变你的形象肖像的任何部分的颜色或其他。视频中的技术会快速方法,初学者photoshopers用户可以使用更先进的技术,修图师的范围内可以使用。



方法1:曲线

曲线在我看来是一种基本工具Adobe PS图象处理软件,它总是你对图像做不同类型的重大变化,从回避和燃烧的颜色校正。在这个过程中,你要记住你要在你想影响的区域里面具或面具。既然我们正在改变我们只想要瞄准一个区域的化妆颜色。如果您尝试更改多个区域,那么我会建议使用单独的调整层来使用单独的调整图层。您可以选择“红色”、“绿色”、“蓝色”颜色通道,但当您这样做时,您将不仅能够介绍或删除这些颜色,您也将更改的免费颜色。所以要记住以下几点:

去除红增加青色

去除绿色增加洋红

去除蓝色黄色

增加你也可能认识到这些添加剂颜色对立–青色,洋红,黄色–为“CMY“CMYK。如果你已经研究了加法和减法的颜色你也知道RGB和CMYK的添加剂的过程是一个减法的过程,所以它也可以直观的程度,我们可以添加青色,品红色,黄色,绿色,减去红色,蓝色。

通过在曲线调整中的每一个通道,你可以把你所期待的精确的颜色组合在一起。在视频中,你会看到我如何进入每一个通道,并作出轻微调整,直到我有希望的颜色。-混合模式,你选择的混合模式,你的颜色调整也将发挥很大的部分,如何调整会影响你的形象。在正常混合的基础上,调整会影响基层的色调、饱和度和亮度。如果你改变了混合模式的颜色,那么它只会影响到色调和饱和度,最后,如果你改变混合模式的色调,这将只会影响色调。在视频中,你可以看到每个混合模式如何改变调整层的外观,
正在翻譯中..
 
其它語言
本翻譯工具支援: 世界語, 中文, 丹麥文, 亞塞拜然文, 亞美尼亞文, 伊博文, 俄文, 保加利亞文, 信德文, 偵測語言, 優魯巴文, 克林貢語, 克羅埃西亞文, 冰島文, 加泰羅尼亞文, 加里西亞文, 匈牙利文, 南非柯薩文, 南非祖魯文, 卡納達文, 印尼巽他文, 印尼文, 印度古哈拉地文, 印度文, 吉爾吉斯文, 哈薩克文, 喬治亞文, 土庫曼文, 土耳其文, 塔吉克文, 塞爾維亞文, 夏威夷文, 奇切瓦文, 威爾斯文, 孟加拉文, 宿霧文, 寮文, 尼泊爾文, 巴斯克文, 布爾文, 希伯來文, 希臘文, 帕施圖文, 庫德文, 弗利然文, 德文, 意第緒文, 愛沙尼亞文, 愛爾蘭文, 拉丁文, 拉脫維亞文, 挪威文, 捷克文, 斯洛伐克文, 斯洛維尼亞文, 斯瓦希里文, 旁遮普文, 日文, 歐利亞文 (奧里雅文), 毛利文, 法文, 波士尼亞文, 波斯文, 波蘭文, 泰文, 泰盧固文, 泰米爾文, 海地克里奧文, 烏克蘭文, 烏爾都文, 烏茲別克文, 爪哇文, 瑞典文, 瑟索托文, 白俄羅斯文, 盧安達文, 盧森堡文, 科西嘉文, 立陶宛文, 索馬里文, 紹納文, 維吾爾文, 緬甸文, 繁體中文, 羅馬尼亞文, 義大利文, 芬蘭文, 苗文, 英文, 荷蘭文, 菲律賓文, 葡萄牙文, 蒙古文, 薩摩亞文, 蘇格蘭的蓋爾文, 西班牙文, 豪沙文, 越南文, 錫蘭文, 阿姆哈拉文, 阿拉伯文, 阿爾巴尼亞文, 韃靼文, 韓文, 馬來文, 馬其頓文, 馬拉加斯文, 馬拉地文, 馬拉雅拉姆文, 馬耳他文, 高棉文, 等語言的翻譯.

Copyright ©2024 I Love Translation. All reserved.

E-mail: