3. 機台的開蓋要剛剛好在那個位置，所以機台要再往後移動40cm，蓋子

3. 機台的開蓋要剛剛好在那個位置，所以機台要再往後移動40cm，蓋子的中心頂端才能剛好在那，但原本機台後方有預留120 cm 要放Laser PS，但現在機台要往後退40cm，機台後方就只剩80cm，會導致後方無法擺放Laser PS。唯一能放的位置只剩N780與P8800擺放的中間走到後面，如下圖:

結果 (英文) 1:

3. The machine of opening the lid to be just good news that position, so the machine again moved back 40cm, center top to cover just that, but the rear of the machine has had to put aside 120 cm Laser PS, but now machine to go back 40cm, on the left rear of the machine 80cm, can cause the rear can not be placed Laser PS. The only way to release the intermediate position only N780 placed P8800 come back, as shown below:

結果 (英文) 2:

3. The opening cover of the machine to just good in that position, so the machine to move back 40cm, the center of the top of the lid can just be in that, but the original rear of the machine has a reservation of 120 cm to put Laser PS, but now the machine to go back 40cm, the rear of the machine is only 80cm, Laser PS cannot be placed at the rear. The only position that can be placed is the n780 and p8800 placement in the middle of the walk to the back, as shown below:

結果 (英文) 3:

3. The cover of the machine should be opened just in that position, so the machine should move back 40 cm, and the top of the cover center can just be there, but there is 120 cm reserved behind the original machine to put laser PS, but now the machine needs to move back 40 cm, and only 80 cm left behind the machine, which will cause that laser PS cannot be placed behind. Only the middle of n780 and p8800 can be placed to the back, as shown below: