車牌辨識系統調整12/5遮排辨識系統調整內容如下：1.將前門摩托車辨識

車牌辨識系統調整12/5遮排辨識系統調整內容如下：1.將前門摩托車辨識用的攝影機移至高處2.將後門負責汽車車牌辨識的攝影機重新固定由於今天下雨,所以前門的攝影機雖然已經架高了,但是還無法進一步設定及測試所以已經和Hikvision的工程師預約於下星期一(12/9)設定和進一步測試,但是如果下雨的話則在改約其它時間而後門的攝影機是出現畫面變得模糊,查看後發現攝影機的固定螺絲鬆脫,造成攝影機震盪,所以畫面才變得模糊目前已經重新固定好攝影機了,也加強了固定方式所以現在後門的汽車車牌辨識已經恢復運作了！但是還是必須等Hikvision的工程師做細部調整,來確認辨識率！已上是12/5的調整內容

結果 (英文) 1:

License plate recognition system to adjust

12/5 row cover identification system to adjust the content as follows:
1. Identification of motorcycle front door with a camera moves to a height
2. The back door is responsible for car license plate recognition camera fixed again

due to rain today, so although the front door camera has a high shelf, but can not be set for further tests and
it has been an engineer and Hikvision appointment next Monday (12/9) and set further testing, but if it rains at other times changed about
the camera and the back door is the emergence of screen is blurred, the review found that the camera fixing screw loose, causing shock camera, so the picture was blurred
now been re-fixed camera, and also strengthened the fixed way
so now the car license plate recognition operation of the back door has been restored!
But still must wait for Hikvision's engineers fine-tuning to do, to confirm the identification rate!
Adjust the content is already on the 12/5

結果 (英文) 2:

If you want to keep the bananas in the frame for a long time, keep them in a tightly closed bag or closed boxes.

結果 (英文) 3:

License plate recognition system adjustment
The adjustment contents of 12 / 5 shading identification system are as follows:
1. Move the front door motorcycle identification camera to a high place
2. Re fix the camera responsible for vehicle license plate recognition at the back door
Because of the rain today, the camera on the front door is already high, but it can not be further set and tested
So we have made an appointment with Hikvision's engineers for setting up and further testing next Monday (12 / 9), but if it rains, we will reschedule it for another time
The camera at the back door is blurry. After checking, it is found that the fixed screw of the camera is loose, causing the camera to vibrate, so the picture becomes blurry
At present, the camera has been fixed again, and the fixation mode has been strengthened
So now the license plate recognition of the back door has resumed operation!
But we still have to wait for Hikvision engineers to make detailed adjustments to confirm the identification rate!
Adjustment content of 12 / 5 has been added