- 文字
- 歷史
3 after the cushion concrete constr
3 after the cushion concrete construction will end axis projection to the surface of cushion, cushion leveling surface with red paint marking the wall column centerline and sideline template. 6.3.3 1
foundation reinforcement engineering scope of this technology is applicable to industrial and civil buildings in the cast-in-place reinforced concrete structure with the diameter of 14 to 40mm grade 1 in the vertical position, horizontal or inclined position of
connection. When the two bar diameter is not at the same time, can also be used in gas pressure welding connection, but the two diameter difference of not more than 7mm. 2 to 2.1 of construction materials and major equipment; reinforced 2.1.1
: steel grade, diameter must meet the design requirements,Ex factory certificate and retest report. Imports of steel should have the chemical composition of single chemical examination, should meet the requirements of welding
, and should solderability test. 2.1.2 (O2): oxygen pressure welding with oxygen purity should be above 99.5%, the quality to meet the requirements of class I or II GB3863 in the level of Technology
foundation reinforcement engineering scope of this technology is applicable to industrial and civil buildings in the cast-in-place reinforced concrete structure with the diameter of 14 to 40mm grade 1 in the vertical position, horizontal or inclined position of
connection. When the two bar diameter is not at the same time, can also be used in gas pressure welding connection, but the two diameter difference of not more than 7mm. 2 to 2.1 of construction materials and major equipment; reinforced 2.1.1
: steel grade, diameter must meet the design requirements,Ex factory certificate and retest report. Imports of steel should have the chemical composition of single chemical examination, should meet the requirements of welding
, and should solderability test. 2.1.2 (O2): oxygen pressure welding with oxygen purity should be above 99.5%, the quality to meet the requirements of class I or II GB3863 in the level of Technology
0/5000
3 后垫层混凝土施工将结束轴投影到面垫层，用红色油漆标记壁柱中线和边线模板缓冲流平表面。6.3.3 1地基加固工程范围的这项技术是适用于工业和民用建筑竖向第 1 年级 14 到 40 毫米直径的现浇在就地钢筋混凝土结构中的位置，水平或倾斜的位置连接。气体压力焊接连接，但两个直径不同到 2.1 施工材料和主要设备 ； 可以使用当钢筋直径的两个不在同一时间，的不超过 7 毫米。 2加筋的 2.1.1： 钢级、 直径必须满足设计的要求前出厂合格证, 及复试报告。进口钢材应有化学成分的单一化学检验，应满足焊接要求并且应可焊性测试。2.1.2 （O2）： 氧气压力焊接与氧气纯度应高于 99.5%，质量符合课程的要求第一或第二 GB3863 中的技术水平
正在翻譯中..
3 after the cushion concrete construction will end axis projection to the surface of cushion, cushion leveling surface with red paint marking the wall column centerline and sideline template. 6.3.3 1
foundation reinforcement engineering scope of this technology is applicable to industrial and civil buildings in the cast-in-place reinforced concrete structure with the diameter of 14 to 40mm grade 1 in the vertical position, horizontal or inclined position of
connection. When the two bar diameter is not at the same time, can also be used in gas pressure welding connection, but the two diameter difference of not more than 7mm. 2 to 2.1 of construction materials and major equipment; reinforced 2.1.1
: steel grade, diameter must meet the design requirements,Ex factory certificate and retest report. Imports of steel should have the chemical composition of single chemical examination, should meet the requirements of welding
, and should solderability test. 2.1.2 (O2): oxygen pressure welding with oxygen purity should be above 99.5%, the quality to meet the requirements of class I or II GB3863 in the level of Technology
foundation reinforcement engineering scope of this technology is applicable to industrial and civil buildings in the cast-in-place reinforced concrete structure with the diameter of 14 to 40mm grade 1 in the vertical position, horizontal or inclined position of
connection. When the two bar diameter is not at the same time, can also be used in gas pressure welding connection, but the two diameter difference of not more than 7mm. 2 to 2.1 of construction materials and major equipment; reinforced 2.1.1
: steel grade, diameter must meet the design requirements,Ex factory certificate and retest report. Imports of steel should have the chemical composition of single chemical examination, should meet the requirements of welding
, and should solderability test. 2.1.2 (O2): oxygen pressure welding with oxygen purity should be above 99.5%, the quality to meet the requirements of class I or II GB3863 in the level of Technology
正在翻譯中..
3在垫层混凝土施工将结束轴投影到垫层表面平整，垫层表面用红漆标记的墙柱的中心线和边线模板。6.3.3 1
该技术加固地基的工程范围适用于工业与民用建筑现浇与14～40mm 1级垂直位置直径的钢筋混凝土结构，水平或倾斜
连接位置。当两钢筋直径不同时，也可用于气压焊连接，但两直径差不超过7mm。2到2.1的建筑材料和主要设备；钢筋2.1.1
：钢级，直径必须符合设计要求，出厂合格证及复试报告。进口钢应具有单一化学考试的化学成分，应符合焊接
要求，并应有可焊性试验。2.1。2（O2）：氧分压和氧纯度的焊接应在99.5%以上，质量符合要求的I类或II在技术水平gb3863
该技术加固地基的工程范围适用于工业与民用建筑现浇与14～40mm 1级垂直位置直径的钢筋混凝土结构，水平或倾斜
连接位置。当两钢筋直径不同时，也可用于气压焊连接，但两直径差不超过7mm。2到2.1的建筑材料和主要设备；钢筋2.1.1
：钢级，直径必须符合设计要求，出厂合格证及复试报告。进口钢应具有单一化学考试的化学成分，应符合焊接
要求，并应有可焊性试验。2.1。2（O2）：氧分压和氧纯度的焊接应在99.5%以上，质量符合要求的I类或II在技术水平gb3863
正在翻譯中..
其它語言
本翻譯工具支援: 世界語, 中文, 丹麥文, 亞塞拜然文, 亞美尼亞文, 伊博文, 俄文, 保加利亞文, 信德文, 偵測語言, 優魯巴文, 克林貢語, 克羅埃西亞文, 冰島文, 加泰羅尼亞文, 加里西亞文, 匈牙利文, 南非柯薩文, 南非祖魯文, 卡納達文, 印尼巽他文, 印尼文, 印度古哈拉地文, 印度文, 吉爾吉斯文, 哈薩克文, 喬治亞文, 土庫曼文, 土耳其文, 塔吉克文, 塞爾維亞文, 夏威夷文, 奇切瓦文, 威爾斯文, 孟加拉文, 宿霧文, 寮文, 尼泊爾文, 巴斯克文, 布爾文, 希伯來文, 希臘文, 帕施圖文, 庫德文, 弗利然文, 德文, 意第緒文, 愛沙尼亞文, 愛爾蘭文, 拉丁文, 拉脫維亞文, 挪威文, 捷克文, 斯洛伐克文, 斯洛維尼亞文, 斯瓦希里文, 旁遮普文, 日文, 歐利亞文 (奧里雅文), 毛利文, 法文, 波士尼亞文, 波斯文, 波蘭文, 泰文, 泰盧固文, 泰米爾文, 海地克里奧文, 烏克蘭文, 烏爾都文, 烏茲別克文, 爪哇文, 瑞典文, 瑟索托文, 白俄羅斯文, 盧安達文, 盧森堡文, 科西嘉文, 立陶宛文, 索馬里文, 紹納文, 維吾爾文, 緬甸文, 繁體中文, 羅馬尼亞文, 義大利文, 芬蘭文, 苗文, 英文, 荷蘭文, 菲律賓文, 葡萄牙文, 蒙古文, 薩摩亞文, 蘇格蘭的蓋爾文, 西班牙文, 豪沙文, 越南文, 錫蘭文, 阿姆哈拉文, 阿拉伯文, 阿爾巴尼亞文, 韃靼文, 韓文, 馬來文, 馬其頓文, 馬拉加斯文, 馬拉地文, 馬拉雅拉姆文, 馬耳他文, 高棉文, 等語言的翻譯.
