项目/小臂长度 短小臂2.40 m 标准小臂2.94 m A 整体长度

项目/小臂长度 短小臂2.40 m 标准小臂2.94 m
A 整体长度 9,530 9,450
B 整体高度（至大臂顶部） 3,160 2,980
C 整体宽度 2,800 2,800
D 整体高度（至驾驶室顶部） 3,030 3,030
E 尾部离地间距* 1,060 1,060
F 离地间距 450 450
G 后端旋回半径 2,750 2,750
G' 从旋回中心到尾部的距离 2,750 2,750
H 前后轮中心距 3,370 3,370
I 履带长度 4,170 4,170
J 轨道间距 2,200 2,200
K 履带宽度 600/700/800
L 上车架宽度 2,710 2,710

*不包括履带板突出部分





主要规格




SK200-8
机器重量 kg
20,600-21,300
挖斗 挖斗容量(ISO标准) m3
0.8 1.0
挖斗容量(CECE标准) m3
0.59 0.76
挖斗宽度或切面(带侧边齿) mm
1,160 1,410
挖斗宽度或切面(不带侧边齿) mm
1,130 1,390
斗齿数
5 5
挖斗重量 kg
810 950
配置 短小臂 2.4m O O
标准小臂 2.94m O X
发动机
型号 日野 J05E
型式 直喷,水冷,四冲程,涡轮增压,内置中冷
额定功率 kW/min-1{PS/rpm}
114/2,000 {155/2,000}
燃油箱 l
370
性能 行走速度 1速/2速 km/h
行走牽引力 kN{kgf}
6.0/3.6
229{23,300}

旋转速度 min-1{rpm}
12.5
爬坡能力 % (°)
70{35°}
接地压强 kPa{kgf/cm2}
36-46 {0.36-0.47}
行走
装置 履带板种类 三筋履带板
履带板宽度 mm
600/700/800
液压
系统 油泵 型式 双联可变排量轴向柱塞泵+1 先导齿轮泵
溢流压力 MPa{kgf/cm2}
37.8{385}
液压油箱容量(全部容量) l
146(230)






作业范围





短小臂 (2.40 m)
标准小臂 (2.94 m)

（单位:m）


项目/小臂 短小臂2.40 m 标准小臂2.94 m
a 最大挖掘半径 9.42 9.90
b 地面最大挖掘半径 9.24 9.73
c 最大挖掘深度 6.16 6.70
d 最大挖掘高度 9.51 9.72
e 最大倾倒高度 6.68 6.91
f 最小倾倒高度 2.98 2.43
g 最大垂直挖掘深度 5.57 6.10
h 最小前端回旋半径 3.56 3.54
i 水平挖掘距离冲程 4.08 5.27
j 8英尺平坦地面挖掘深度 5.95 6.52
挖斗容量 SAE标准 m3 1.0 0.8

挖掘力 (ISO 6015) 单位: kN{kgf}

短小臂2.40 m 标准小臂 2.94 m
挖斗挖掘力 143{14.6} 157{16.0}* 143{14.6} 157{16.0}*
小臂挖掘力 121{12.3} 133{13.6}* 102{10.4} 112{11.4}*

*增压时

結果 (中文) 2:

The project / small arm length of the short arm of M standard 2.40 small arm 2.94 m
A overall length of 95309450
B overall height (to the top of the upper arm) 31602980
C overall width of 28002800
D overall height (to the top of the driving cab) 30303030
E tail ground spacing * 10601060
F ground spacing 450450
G back-end cycles from center to the radius of 27502750
G'cycles before and after the tail of the distance of 27502750
H wheel center distance 33703370
I track length of 41704170
J track spacing of 22002200
K width of track 600/700/800
L car frame width 27102710

* does not include the crawler plate





the prominent part of the main specifications of




SK200-8
machine weight kg
20600-21300
bucket bucket capacity (ISO standard) m3
0.8
1 bucket capacity (CECE standard) m3
0.59 and 0.76
bucket width (or section with side the side tooth) mm
11601410
bucket width or section (without side tooth) mm
11301390
bucket tooth number
55
bucket weight kg
810950
O
O configuration short arm of 2.4m 2.94M O X standard for small arms


type engine models Hino J05E direct injection, water,Four stroke, turbocharged, built-in cooling rated power kW/min-1{PS/rpm}
114/2000
{155/2000}
L
370
performance of fuel tank walking speed of 1 fast /2 speed km/h
walking traction climbing ability of kN{kgf}
6.0/3.6 and
229{23300}

rotation speed of min-1{rpm}
12.5
% (° 70{35 °})

kPa{kgf/cm2}
36-46 ground pressure {0.36-0.47}

means walking track plate type three tendons track plate track plate width
mm
600/700/800

system hydraulic pump type double variable-displacement axial piston pump gear pump
1 pilotThe overflow pressure MPa{kgf/cm2}
37.8{385}
hydraulic tank capacity (full capacity) L
146 (230






)





operation range of short arm (2.40 m)
standard small arms (2.94 m)

(unit: m)


project / small arm short arm 2.40 m standard small arms 2.94 m
a maximum digging radius of 9.42 9.90
b ground maximum digging radius of 9.24 9.73
c maximum digging depth of 6.16 6.70
d maximum digging height of 9.51 9.72
e maximum height of pouring 6.68 6.91
f minimum dumping height of 2.98 2.43
g maximum vertical depth of 6.10
5.57H minimum tip radius of gyration of 3.56 3.54
i level mining distance stroke 4.08 5.27
j 8 feet flat ground mining depth of 5.95 6.52
bucket capacity of SAE standard m3 1 0.8

digging force (ISO 6015) unit: kN{kgf}

short arm 2.40 m standard small arms 2.94 m
bucket digging force 143{14.6} 157{16.0}* 143{14.6} 157{16.0}*
small arms 121{12.3} 133{13.6}* 102{10.4} 112{11.4}* digging force

* supercharging