Hello all, As agreed, the LG resin

Hello all,

As agreed, the LG resin can be arranged to the trail in next Monday. Following is the agenda for the

1. Take a look at the tool, machine(which m/c is dedicated)

2. Take away the tool to mold maintenance room, open up, disassemble, clean up tool components, and check tool condition

3. Check molding M/C condition &open up the barrel and screw, check condition and clean up them as needed.

4. Clean up the resin drier, and check drier and pipes condition

5. Bring the resin to drier

6. Install barrel & screw, tool

7. Set up molding process

8. Production (C type 75Kg and B type 25Kg)

From Nokia side, Eunbo Shim, Holly Hui and I will go to support this trail. Mika, please join us if you are available in next Monday.



@Eunbo, please support to get LG material on board at Nolato in this Friday for their internal arrangement. Thanks!

結果 (英文) 2:

大家好，

约定的LG树脂，可以安排在下星期一的踪迹。以下是议程的

1。考虑一下工具，机器（这证专用）

2。把工具模具维修室，打开，拆卸，清洁工具组件，并检查工具的条件

3。检查成型机条件&打开桶和螺丝，检查和清理他们的需要。

4。清除树脂干燥机，干燥机和管道的检查条件

5。将树脂干燥机

6。&螺钉安装筒，

工具7。建立过程

8。（75生产型和乙型25公斤）

从诺基亚，eunbo垫片，冬青回族和我会去支持这个线索。米卡，请加入我们，如果你可以在下星期一。



@ eunbo，请支持得到LG材料板在nolato在本星期五的内部布置。谢谢！