100:00:02,190 --> 00:00:05,844I've

1
00:00:02,190 --> 00:00:05,844
I've seen more than my fair share of color problems in older photos, and this

2
00:00:05,844 --> 00:00:11,450
is a very good example of the type of problems that I run into from time to time.

3
00:00:11,450 --> 00:00:15,098
I'm not sure if this was caused by damage after the print had been placed into a

4
00:00:15,098 --> 00:00:18,632
photo album or if perhaps there had been some light leakage on the original

5
00:00:18,632 --> 00:00:24,526
transparency, the original negative. But whatever the cause, I have this

6
00:00:24,526 --> 00:00:28,090
orange blob over on the left side of the frame, and I'd obviously like to correct

7
00:00:28,090 --> 00:00:31,918
that color. You can see that that discoloration is

8
00:00:31,918 --> 00:00:35,837
not affecting the texture in the photo. We can still see, for example, the grass

9
00:00:35,837 --> 00:00:39,310
texture back here. It's only affecting the color.

10
00:00:39,310 --> 00:00:44,560
So, I'm going to alter the color in the photo in order to improve the result.

11
00:00:44,560 --> 00:00:48,775
I'll start off by adding a new layer. I'll click on the Create New Layer button.

12
00:00:48,775 --> 00:00:51,830
The blank sheet of paper icon at the bottom of the Layers panel.

13
00:00:51,830 --> 00:00:54,885
And then I'll rename this layer, simply by double-clicking on the name for the

14
00:00:54,885 --> 00:00:59,032
layer and typing something new. I'll just type Color Fix, for example,

15
00:00:59,032 --> 00:01:02,410
and then press Enter or Return on the keyboard.

16
00:01:02,410 --> 00:01:06,470
I also want to make sure to change the Blend mode for this layer.

17
00:01:06,470 --> 00:01:09,818
I don't want to paint pixels directly on top of my photo, but rather I want to

18
00:01:09,818 --> 00:01:14,530
paint pixels that will only alter the color of the underlying image.

19
00:01:14,530 --> 00:01:18,150
An so I'm going to change the Blend mode, to color.

20
00:01:18,150 --> 00:01:21,516
Next, I'll grab the Brush tool from the toolbox, and then I'll make sure that I'm

21
00:01:21,516 --> 00:01:26,752
working with a soft edge brush. I'm going to use a Hardness value of 0%.

22
00:01:26,752 --> 00:01:30,058
Then I can move my mouse out over the image and adjust the brush size as

23
00:01:30,058 --> 00:01:33,480
needed, pressing the key to reduce the size of the brush, or the key to

24
00:01:33,480 --> 00:01:39,242
increase the size of the brush. I then need to find a color that I'm

25
00:01:39,242 --> 00:01:42,188
going to paint with. And we'll start off with a shade of green

26
00:01:42,188 --> 00:01:45,663
that matches the grass. And so, with my Brush tool active, I'm

27
00:01:45,663 --> 00:01:49,443
going to hold the Alt key on Windows, or the Option key on Macintosh while

28
00:01:49,443 --> 00:01:54,590
clicking on an area of the grass. Holding the Alt or Option key with the

29
00:01:54,590 --> 00:01:58,300
Brush tool activate will give me the Eyedropper tool temporarily.

30
00:01:58,300 --> 00:02:01,615
And as you can see, then clicking in the image has set my foreground color to the

31
00:02:01,615 --> 00:02:06,438
color that was underneath the mouse. Now, I'm ready to paint into this area of

32
00:02:06,438 --> 00:02:09,561
the image. The area has this reddish orange color

33
00:02:09,561 --> 00:02:13,709
cast, and I'm going to replace that color with a shade of green taken from directly

34
00:02:13,709 --> 00:02:17,740
within the photo. So, I know the color is going to match

35
00:02:17,740 --> 00:02:22,128
reasonably well. I'll go ahead and paint that color into

36
00:02:22,128 --> 00:02:26,130
the photo. Ideally only painting on areas of grass.

37
00:02:26,130 --> 00:02:29,010
You can see that some of these areas don't quite match up as well as I would

38
00:02:29,010 --> 00:02:32,430
have liked. I think the color I chose just wasn't

39
00:02:32,430 --> 00:02:35,368
quite right for portions of the grass here.

40
00:02:35,368 --> 00:02:38,245
But that's no problem. I can simply hold the Alt or Option key

41
00:02:38,245 --> 00:02:41,680
once again. And click in another area of the image.

42
00:02:41,680 --> 00:02:45,160
And find a different shade of grass, a different shade of green to be used

43
00:02:45,160 --> 00:02:48,790
within the photo. And I can continue in this manner as

44
00:02:48,790 --> 00:02:52,750
needed, painting what I feel is a more appropriate color into specific areas of

45
00:02:52,750 --> 00:02:56,859
the photo. Of course, in this case I'm only working

46
00:02:56,859 --> 00:03:00,510
on the grass. I still need to deal with the elbow here.

47
00:03:00,510 --> 00:03:04,137
The jacket has been discolored as well. And so I'll go ahead and hold the alt or

48
00:03:04,137 --> 00:03:08,308
option key and click on the jacket. And then click and drag to paint on

49
00:03:08,308 --> 00:03:12,818
portions of that jacket. You can see that I've overlapped into the

50
00:03:12,818 --> 00:03:15,676
grass area. And so I can simply choose a shade of

51
00:03:15,676 --> 00:03:21,840
green from the grass and then paint a little bit more carefully along that edge.

52
00:03:21,840 --> 00:03:24,237
There we go. So, obviously not a perfect result, but

53
00:03:24,237 --> 00:03:27,626
I'm making progress here. I can continue working in terms of

54
00:03:27,626 --> 00:03:31,640
sampling the colors, but let's take a look at what I've done thus far.

55
00:03:31,640 --> 00:03:34,722
I'll go ahead and turn off the background image layer, and you can see the various

56
00:03:34,722 --> 00:03:37,880
shades of green that I've painted within the image.

57
00:03:37,880 --> 00:03:40,770
I've actually just been painting a solid color.

58
00:03:40,770 --> 00:03:44,738
But because I'm using the color blend mode Only the color of the underlying

59
00:03:44,738 --> 00:03:48,722
image is being affected. I'm not adjusting tonality, and

60
00:03:48,722 --> 00:03:52,430
therefore, I'm not altering the texture. So I'll go ahead and turn off the

61
00:03:52,430 --> 00:03:55,890
visibility for that color fix layer, and then turn it back on again.

62
00:03:55,890 --> 00:03:58,740
You can see probably a few areas that aren't a perfect match, but I can

63
00:03:58,740 --> 00:04:03,450
continue fine-tuning those. But obviously, I've already made a huge improvement.

64
00:04:03,450 --> 00:04:07,162
So, simply by painting colors that already exist within the photo using that

65
00:04:07,162 --> 00:04:12,840
color blend mode, we can very quickly and easily correct color problems in a photo.

結果 (中文) 1:

100:00:02，190--> 00:00:05，844我见过更多比我的旧照片中的颜色问题的公平份额和这200:00:05，844--> 00:00:11，450是很好的例子，我跑进次又一次的问题的类型。300:00:11 450--> 00:00:15，098我不知道这造成的损害后打印已放入400:00:15，098--> 00:00:18，632相册或假如或许有一些轻微的漏原500:00:18，632--> 00:00:24，526透明度，原底片。但不管是什么原因，我有这个600:00:24，526--> 00:00:28，090在左边的框架中，在橙色 blob 和显然希望纠正700:00:28，090--> 00:00:31，918那种颜色。你可以看到那变色是800:00:31，918--> 00:00:35，837不影响质感的照片。我们可以还看到，例如，草900:00:35，837--> 00:00:39，310纹理回到这里。它只影响颜色。1000:00:39，310--> 00:00:44，560所以，我要去改变这张照片中的颜色，以改善结果。1100:00:44，560--> 00:00:48，775我想先通过添加一个新图层。点击创建新图层按钮。1200:00:48，775--> 00:00:51，830张空白的纸层面板底部的图标。1300:00:51，830--> 00:00:54，885然后我会简单地通过双击名称重命名这一层，1400:00:54，885--> 00:00:59，032层和键入新的东西。我会只需键入颜色修复，例如，1500:00:59，032--> 00:01:02，410然后按 Enter 键或 Return 在键盘上。1600:01:02，410--> 00:01:06，470我也想要请确保更改这一层的混合模式。1700:01:06，470--> 00:01:09，818我不想要绘制像素直接放在我的照片，但是我想去宁愿1800:01:09，818--> 00:01:14，530只会改变底层图像颜色的油漆像素。1900:01:14，530--> 00:01:18，150所以我要去更改混合模式为颜色。2000:01:18，150--> 00:01:21，516接下来，我会抓住从工具箱中的画笔工具，然后我会确保我是2100:01:21，516--> 00:01:26，752用软边画笔的工作。我要去使用硬度值为 0%。2200:01:26，752--> 00:01:30，058我可以将我鼠标移到图像，然后调整笔刷的大小作为2300:01:30，058--> 00:01:33，480需要，按键来减小画笔的大小或的关键2400:01:33，480--> 00:01:39，242增加画笔的大小。然后，我需要找到我的颜色2500:01:39，242--> 00:01:42，188要用颜料。我们将开始与阴影的绿色2600:01:42，188--> 00:01:45，663与相匹配的草。因此，我积极的笔刷工具，我2700:01:45，663--> 00:01:49，443要在 Windows 中或在 Macintosh 上的 Option 键按住 Alt 键2800:01:49，443--> 00:01:54，590单击在小区的草地上。按住 Alt 键或 Option 键与2900:01:54，590--> 00:01:58，300画笔工具激活会暂时给我吸管工具。3000:01:58，300--> 00:02:01，615正如你所看到的然后单击图像中，我们就已将我的前景颜色设置为与3100:02:01，615--> 00:02:06，438在鼠标下的颜色。现在，准备进入这一领域的涂料3200:02:06，438--> 00:02:09，561图像。这个地区有这种红色的橘红色3300:02:09，561--> 00:02:13，709演员，和我要去那种颜色替换绿色直接取自一个阴影3400:02:13，709--> 00:02:17，740在这张照片。所以，我知道颜色要匹配3500:02:17，740--> 00:02:22，128相当不错。我会往前走，画成那种颜色3600:02:22，128--> 00:02:26，130这张照片。理想的情况只有绘画领域的草。3700:02:26，130--> 00:02:29，010你可以看到，这些地区的一些不匹配，以及我会3800:02:29，010--> 00:02:32，430有喜欢。我认为我只是选择的颜色不是3900:02:32，430--> 00:02:35，368很适合这里的草的部分。4000:02:35，368--> 00:02:38，245但这是没有问题。我可以简单地按住 Alt 键或 Option 键4100:02:38，245--> 00:02:41，680再来一次。然后在另一个区域的图像。4200:02:41，680--> 00:02:45，160找到一个不同的草，一个不同的绿色用于阴影阴影4300:02:45，160--> 00:02:48，790在这张照片。我可以继续以这种方式作为4400:02:48，790--> 00:02:52，750需要画我的感觉是更合适的颜色，到具体的领域4500:02:52，750--> 00:02:56，859这张照片。当然，在这种情况下我只工作4600:02:56，859--> 00:03:00，510草地上。我仍然需要处理这里的手肘。4700:03:00，510--> 00:03:04，137这件夹克有以及变色。所以我会往前走，按住 alt 或4800:03:04，137--> 00:03:08，308option 键并点击这件夹克。然后单击并拖动以在上绘画4900:03:08，308--> 00:03:12，818那件夹克的部分。你可以看到我已经重叠成5000:03:12，818--> 00:03:15，676草地面积。所以我可以简单地选择阴影的5100:03:15，676--> 00:03:21，840从草，然后油漆有点更仔细地沿该边的绿色。5200:03:21，840--> 00:03:24，237我们去那里。这样，显然不是一个完美的结果，但5300:03:24，237--> 00:03:27，626我在这里进步。我可以继续工作的角度5400:03:27，626--> 00:03:31，640取样的颜色，但是让我们看看目前为止什么做。5500:03:31，640--> 00:03:34，722我会继续和背景图像图层，关闭，你可以看到不同5600:03:34，722--> 00:03:37，880色调的我刷了在图像内的绿色。5700:03:37，880--> 00:03:40，770我已经实际上只画一种纯色。5800:03:40，770--> 00:03:44，738但因为我使用了颜色混合模式只有底层颜色5900:03:44，738--> 00:03:48，722图像是受到影响。我不调整色调，和6000:03:48，722--> 00:03:52，430因此，我不改变纹理。所以我会继续关闭6100:03:52，430--> 00:03:55，890那种颜色的可见性修复层，然后将它重新打开。6200:03:55，890--> 00:03:58，740你可以看到可能的几个领域，不是一场完美的比赛，但我可以6300:03:58，740--> 00:04:03，450继续微调那些。但很显然，我已经作好一个巨大的改进。6400:04:03，450--> 00:04:07，162所以，简单地由绘画颜色，已经存在内使用的照片6500:04:07，162--> 00:04:12，840颜色混合模式，我们可以非常快速、 方便地纠正在一张照片的颜色问题。

結果 (中文) 3:

1
00:00:02190——> 00:00:05844
我见过比我的公平份额的老照片的色彩问题，这

2
00:00:05844——> 00:00:11450
是一个很好的问题，我遇到的时间类型的例子。

3
00:00:11450——> 00:00:15098
我不当然如果这是晒版后被放置到一个

4
00:00:15098——> 00:00:18632
所造成的损害相册或者也许已经在原来的

5
00:00:18632——> 00:00:24526
透明一些漏光，原始底片。但不管是什么原因，我有这个

6
00:00:24526——> 00:00:28090
橙色的斑点在车架左侧，我当然想正确

7
00:00:28090——> 00:00:31918
颜色。你可以看到，这是

8
00:00:31变色，918——> 00:00:35837
不影响照片中的纹理。我们还可以看到，例如，草

9
00:00:35837——> 00:00:39310
纹理回到这里。它只影响颜色。

10
00:00:39310——> 00:00:44560
所以，我要改变颜色以照片来提高成绩。

11
00:00:44560——> 00:00:48775
我先添加一个新层。我会点击“创建新的图层”按钮。

12
00:00:48775——> 00:00:51830
图层面板底部的图标的空白纸。

13
00:00:51830——> 00:00:54885
然后我命名图层，只需双击的

14
00:00:54885名称——> 00:00:59032
层和输入新的东西。我就比如刚定色，型，

15
00:00:59032——> 00:01:02410
然后按回车键或键盘上的回报。

16
00:01:02410——> 00:01:06470
我也要确保更改该图层的混合模式。

17
00:01:06470——> 00:01:09818
我不想画像素直接上我的照片，而是我想

18
00:01:09818——> 00:01:14530
漆像素，只会改变底层图像的颜色。

19
00:01:14530——> 00:01:18150
所以我要改变混合模式，颜色。

20
00:01:18150——> 00:01:21516
接下来，我将工具箱中的画笔工具，然后我会确保我

21
00:01:21516——> 00:01:26752
用软边刷工作。我将用一个0%的硬度值。

22
00:01:26752——> 00:01:30058
然后我可以移动我的鼠标在图像，调整画笔大小为23


00:01:30，058——> 00:01:33480
需要，压减小笔刷大小的关键，关键还是

24
00:01:33480——> 00:01:39242
增加画笔的大小。我需要找到一种颜色，我

25
00:01:39242——> 00:01:42188
去漆。我们将开始与绿色

26
00:01:42188绿荫——> 00:01:45663
相匹配的草。所以，用我的画笔工具，我是00，27：01:45663——> 00:01:49443
要在Windows ALT键，或选择重点在Macintosh而

28
00:01:49443——> 00:01:54590
点击草地面积。按住Alt或Option键与

29
00:01:54590——> 00:01:58300
画笔工具激活会给我吸管工具是暂时的。

30
00:01:58300——> 00:02:01615
正如你所看到的，然后点击在图像设置我的前景颜色的

31
00:02:01615——> 00:02:06438
颜色，鼠标底部。现在，我准备油漆这方面的

32
00:02:06438——> 00:02:09561
图像。该地区有橙红色的颜色

33
00:02:09561——> 00:02:13709
铸造，我要换一个绿色从直接

34
00:02:13颜色，709——> 00:02:17740
内照片。所以，我知道颜色要匹配

35
00:02:17740——> 00:02:22128
相当好。我会去漆，颜色为

36
00:02:22128——> 00:02:26130
照片。只有画在长草的地方。

37
00:02:26130——> 00:02:29010
你可以看到，有些地方不太匹配以及我会

38
00:02:29010——> 00:02:32，430，有喜欢。我觉得颜色我选择不

39
00:02:32430——> 00:02:35368
很适合部分的草来。

40
00:02:35368——> 00:02:38245
但没问题。我只需按住Alt或Option键

41
00:02:38245——> 00:02:41680
再次。然后单击另一个地区的形象。

42
00:02:41680——> 00:02:45160
找一个不同颜色的草，深浅不同的绿色是用

43
00:02:45160——> 00:02:48790
内照片。我可以继续以这种方式为

44
00:02:48790——> 00:02:52750
需要画什么，我觉得是一个比较合适的颜色为

45
00:02:52750特定领域——> 00:02:56859
照片。当然，在这种情况下，我只是工作

46
00:02:56859——> 00:03:00510
在草地上。我还需要在这里处理肘。

47
00:03:00510——> 00:03:04137
夹克已变色以及。所以我会去按住Alt或

48
00:03:04137——> 00:03:08308
Option键并点击夹克。然后点击并拖动到

49
00:03:08308——> 00:03:12818
部分外套的油漆。你能看到我的

重叠为50
00:03:12818——> 00:03:15676
草区。所以我可以简单地选择一个色调的

51
00:03:15676——> 00:03:21840
绿色的草然后油漆更仔细一点沿边缘。

52
00:03:21840——> 00:03:24237
我们走。所以，显然不是一个完美的结果，但

53
00:03:24237——> 00:03:27626
我进步。我可以继续工作，在

54
00:03:27626条款——> 00:03:31640
采样的颜色，但让我们来看看我做了什么到目前为止。

55
00:03:31640——> 00:03:34722
我先走一步，关闭背景图层，你可以看到不同的

56
00:03:34722——> 00:03:37880
深浅不同的绿色，我画的图像
。
57
00:03:37880——> 00:03:40770
其实我刚刚画的一种颜色。

58
00:03:40770——> 00:03:44738
但因为我是使用色彩混合模式只有颜色的基本

59
00:03:44738——> 00:03:48722
形象受到影响。我没有调整音调，和

60
00:03:48722——> 00:03:52430
因此，我不会改变纹理。所以我会去关掉

61
00:03:52430——> 00:03:55890
能见度颜色修复层，然后再重新打开它。

62
00:03:55，890——> 00:03:58740
你可以看到大概几个领域没有一个完美的比赛，但我可以

63
00:03:58740——> 00:04:03450
继续微调这些。但很明显，我已经有了一个巨大的进步。

64
00:04:03450——> 00:04:07162
所以，仅仅通过绘画色彩早已存在的使用

65
00:04:07162——> 00:04:12840
颜色混合模式的照片，我们可以很快，很容易纠正颜色问题的照片。