2、电缆接入：拧开（序号1接线盒盖），将仪表电缆通过（序号5电气接口）

2、电缆接入：拧开（序号1接线盒盖），将仪表电缆通过（序号5电气接口）穿到（序号2接线盒）中并紧固，电缆引线连接至（序号3接线板）对应接线柱上。

結果 (英文) 1:

2, cable access: unscrew (number 1 junction box cover), the instrument cable through (number 5 electrical interface) wear (number 2 junction boxes) and tighten cable wire connected to (number 3 strips) on the corresponding terminals.

結果 (英文) 2:

2, cable access: Unscrew (No. 1 junction box cover), through the instrument cable (No. 5 electrical interface) to wear (No. 2 terminal block) and fasten the cable lead to the (No. 3 wiring board) corresponding to terminal on.

結果 (英文) 3:

2, cable access: unscrew (serial number 1, the instrument cable junction box) through (serial number 5 electrical interface (serial number 2) through the junction box) and fastening cable connected to the (serial number 3 corresponding terminal wiring board).