2.2 烟道系统阻力计算及分析通过计算可知，5#单独运行时，各段阻力中

2.2 烟道系统阻力计算及分析
通过计算可知，5#单独运行时，各段阻力中，引风机出口至吸收塔入口段的烟道阻力最高，其次为除尘器出口至引风机入口段阻力。#6炉各段阻力中最大值与#5炉各段阻力中最大值位于同一位置，均在引风机出口至吸收塔入口段的烟道。同时，#6炉改造前该位置设有一台半干法脱硫设备，脱硫改造后充当烟道使用，因此，在对其结构进行优化也应从此方面考虑。

結果 (英文) 1:

2.2 resistance calculation and analysis of flue systemThrough calculation, 5# when running alone, in the resistance, induced draft fan outlet flue highest resistance to absorption tower entrance, followed by the filter outlet to the fan inlet resistance. #6 boiler resistance maximum values with #5 furnace resistance maximum values are in the same position, fan flue exported to the Tower entrance. Meanwhile, #6 the location before the furnace with a semi-dry flue gas desulfurization equipment, as after desulfurization flue used, therefore, to optimize its structure should also be considered.

結果 (英文) 2:

2.2 Calculation and analysis of the flue system resistance
by calculation, # 5 separate operation, the resistance of each segment, the induced draft fan flue outlet to the highest resistance to absorber inlet section, followed by exports to the induced draft fan precipitator inlet section resistance. # 6 paragraphs furnace resistance furnace # 5 and the maximum value of each segment resistance maximum value at the same location in both the induced draft fan flue outlet to the inlet section of absorption tower. Meanwhile, the front of the Furnace # 6 position with a semi-dry desulphurization equipment, the use of flue gas desulfurization modified to serve, therefore, to optimize its structure should also be considered from this aspect.

結果 (英文) 3:

2.2 flue system resistance calculation and analysisBy calculation, 5# separate operation, pressure, fan outlet to absorption tower entrance flue resistance is highest, followed by the dust outlet to fan entrance section resistance. The maximum pressure of #6 furnace and #5 furnace pressure in the maximum value in the same location, both in the flue fan exit to the entrance section of the absorption tower. At the same time, #6 furnace before the transformation of the location with a semi dry desulfurization equipment, desulfurization transformation as a flue, therefore, in the optimization of its structure should also be considered from this aspect.