此案件生產時，PCB表面外觀不可有刮傷，進料檢時，需確認外觀是否有刮傷

此案件生產時，PCB表面外觀不可有刮傷，進料檢時，需確認外觀是否有刮傷異常，將非上件區域使用防焊膠帶進行保護作業，生產作業完成後，進行清洗時，才可將膠帶移除，轉出前必須再進行檢查是否有刮傷及拍照。

結果 (英文) 1:

When producing this case, PCB surface appearance can not be scratched, the feed sample, required to confirm whether abnormal appearance of scratches, the non-use area of ​​the element solder protection tape job, after completion of production operations, cleaning only tape can be removed before the roll-out must then inspect for scratches and photographed.

結果 (英文) 2:

字典

結果 (英文) 3:

During the production of this case, the surface appearance of PCB shall not be scratched. During the incoming inspection, it is necessary to confirm whether there is any abnormal scratched appearance. The non upper part area shall be protected with anti welding tape. After the production operation is completed, the tape can be removed before cleaning. Before transferring out, it is necessary to check whether there is scratched and take photos.