100:00:02,110 --> 00:00:07,450With

1
00:00:02,110 --> 00:00:07,450
With older photos, it is quite common to see uneven lighting across the image.

2
00:00:07,450 --> 00:00:10,024
You can see over on the left side of the image, for example, on the hillside here,

3
00:00:10,024 --> 00:00:12,530
there's an area that looks a little bit bright.

4
00:00:12,530 --> 00:00:16,490
And the foreground overall seems a bit bright as well.

5
00:00:16,490 --> 00:00:19,260
In many cases this might simply be an exposure issue.

6
00:00:19,260 --> 00:00:22,824
For example a lot of reflected light in the foreground causing the lower half of

7
00:00:22,824 --> 00:00:26,064
this image seem very bright, but sometimes, it can be caused by problems

8
00:00:26,064 --> 00:00:29,628
with the printing, or the emulsion, or even the film, and whatever the cause, it

9
00:00:29,628 --> 00:00:35,200
can be helpful to adjust these areas of the photo.

10
00:00:35,200 --> 00:00:38,800
And in these types of situations what I'll often do is apply a dodging and

11
00:00:38,800 --> 00:00:42,820
burning effect to the image, where I can brighten or darken specific areas of the

12
00:00:42,820 --> 00:00:48,070
photo simply by painting on it. The first step is to create a new layer

13
00:00:48,070 --> 00:00:51,170
for that dodging and burning, but not just any layer.

14
00:00:51,170 --> 00:00:54,572
So, instead of just clicking on the Create New Layer button, the blank sheet

15
00:00:54,572 --> 00:00:58,082
of paper icon at the bottom of the layers panels, I'm going to hold the Alt key on

16
00:00:58,082 --> 00:01:04,270
Windows, or the Option key on MacIntosh, while clicking on that layer.

17
00:01:04,270 --> 00:01:07,780
That will cause a new layer dialog to appear, where I can adjust the properties

18
00:01:07,780 --> 00:01:12,410
for the new layer that I'm adding. I'll go ahead and type a name.

19
00:01:12,410 --> 00:01:15,758
I'll just call this dodge and burn, and I'm going to change the blend mode to

20
00:01:15,758 --> 00:01:19,160
overlay and that is perhaps the most important aspect here is changing that

21
00:01:19,160 --> 00:01:25,010
blend mode to overlay, which will give us the behavior that we're looking for.

22
00:01:25,010 --> 00:01:28,732
We'll see that in just a moment. I'll go ahead and turn on the check box

23
00:01:28,732 --> 00:01:33,590
to fill this layer with the overlay neutral color, which is 50% gray.

24
00:01:33,590 --> 00:01:37,400
And I'll show you the benefit of filling this layer with gray in just a moment.

25
00:01:37,400 --> 00:01:40,739
First I'll go ahead and click the OK button in order to create this layer that

26
00:01:40,739 --> 00:01:44,131
again is called dodge and burn, that has a blend mode set to overlay, and thats

27
00:01:44,131 --> 00:01:48,577
filled with gray. Once I click okay, you'll see that I have

28
00:01:48,577 --> 00:01:51,810
my dodge and burn layer created on my layers panel.

29
00:01:51,810 --> 00:01:56,240
It is filled with middle gray, and the blend mode has been changed to overlay.

30
00:01:56,240 --> 00:01:59,530
The next step is to choose the Brush tool.

31
00:01:59,530 --> 00:02:03,430
That's right, we're going to use the Brush tool for this dodging and burning technique.

32
00:02:03,430 --> 00:02:07,363
Rather than the dodge and burn tools that are already included in Photoshop, and so

33
00:02:07,363 --> 00:02:13,570
I'll choose the Brush tool and then make sure that I'm working with a soft edged brush.

34
00:02:13,570 --> 00:02:17,026
You can see that I have some circular brushes that are very fuzzy as apposed to

35
00:02:17,026 --> 00:02:20,590
crisp, I can choose one of those and then make sure that the hardness value is all

36
00:02:20,590 --> 00:02:26,866
the way to the left at a 0% value. I'll make sure that the blend mode for

37
00:02:26,866 --> 00:02:30,964
the brush itself is set to normal. The overall blend mode is used for the

38
00:02:30,964 --> 00:02:35,860
Layer, not for the Brush itself. And then finally, I'll adjust the opacity.

39
00:02:35,860 --> 00:02:39,282
I can use the pop up here in order to bring up a slider, but I'll generally

40
00:02:39,282 --> 00:02:44,291
simply press a number on the keyboard. The number one will give me 10%, the

41
00:02:44,291 --> 00:02:49,070
number two will give me 20%. If I type 15 quickly that will give me

42
00:02:49,070 --> 00:02:54,720
15%, but in most cases, I'll work with an opacity setting of 10%.

43
00:02:54,720 --> 00:02:57,905
I'll then make sure that the colors are set to black and white, you can see those

44
00:02:57,905 --> 00:03:01,990
at the bottom of the tool box. Black for the foreground color, and white

45
00:03:01,990 --> 00:03:05,413
for the background color. It's a good idea to simply press the

46
00:03:05,413 --> 00:03:10,100
letter d on your keyboard for defaults so that you have these colors set.

47
00:03:10,100 --> 00:03:13,250
Sometimes you might have a shade of gray that looks nearly black or white for

48
00:03:13,250 --> 00:03:16,530
example, and it's best to get a consistent result.

49
00:03:16,530 --> 00:03:21,340
You can switch between these colors by pressing x, for exchange, on the keyboard.

50
00:03:21,340 --> 00:03:24,290
In this case I need to darken up some areas of the photo, so I'll make sure

51
00:03:24,290 --> 00:03:27,330
that the foreground color is set to black.

52
00:03:27,330 --> 00:03:30,380
I'll then move my mouse out over the image, and adjust the brush size using

53
00:03:30,380 --> 00:03:34,948
the left and right square bracket keys. The right square bracket will increase

54
00:03:34,948 --> 00:03:39,150
the brush size and the left square bracket will decrease the brush size.

55
00:03:39,150 --> 00:03:42,798
And so with black as my foreground color and the opacity at 10%, I can adjust my

56
00:03:42,798 --> 00:03:46,560
brush size and then paint into this area of the hillside that's looking a little

57
00:03:46,560 --> 00:03:51,198
bit bright. I can also increase the brush size here

58
00:03:51,198 --> 00:03:54,800
and paint into the foreground area of the photo.

59
00:03:54,800 --> 00:03:58,155
Now keep in mind that areas that are white are not going to be affected, and

60
00:03:58,155 --> 00:04:01,960
areas that are black are not going to be affected.

61
00:04:01,960 --> 00:04:07,460
We're only adjusting shades of gray, and sometimes the effect might seem a bit subtle.

62
00:04:07,460 --> 00:04:10,877
You'll notice here, for example, as I'm painting, that we're not really seeing a

63
00:04:10,877 --> 00:04:14,243
very obvious effect, and yet, if I turn off the visibility for the dodge and burn

64
00:04:14,243 --> 00:04:19,860
layer, and then turn it back on again, you can see a relatively strong effect.

65
00:04:19,860 --> 00:04:23,780
Not a huge impact on the image, but certainly, a little bit of a darkening.

66
00:04:23,780 --> 00:04:27,074
You can always increase the opacity and paint again And in fact, painting

67
00:04:27,074 --> 00:04:32,170
multiple strokes over the same area will increase the impact in that area.

68
00:04:32,170 --> 00:04:35,131
That can be a very good thing if you want to paint multiple strokes in order to

69
00:04:35,131 --> 00:04:39,093
increase the effect in an area. But it's also important to keep in mind,

70
00:04:39,093 --> 00:04:42,357
that if you want an even effect in the photo, you need to keep that mouse button

71
00:04:42,357 --> 00:04:48,230
held down while you paint over that entire area before releasing the mouse.

72
00:04:48,230 --> 00:04:51,080
Now I mentioned that it was helpful to have the layer filled with gray.

73
00:04:51,080 --> 00:04:54,590
The reason for that is that sometimes you might find it helpful to evaluate the

74
00:04:54,590 --> 00:04:58,910
areas that you've been painting. And if you have a checkerboard pattern

75
00:04:58,910 --> 00:05:02,430
that's associated with a transparent layer, it's not quite as easy to see the

76
00:05:02,430 --> 00:05:05,840
relatively subtle paint strokes that you're painting By having that gray

77
00:05:05,840 --> 00:05:09,360
background, we're able to very clearly see even areas that did not get much of

78
00:05:09,360 --> 00:05:14,901
an effect in the photo. I'll go ahead and turn on the visibility

79
00:05:14,901 --> 00:05:18,097
for the background image layer, and then once again I'll toggle the visibility of

80
00:05:18,097 --> 00:05:23,520
the dodge and burn layer so that we can see very clearly the effect in the image.

81
00:05:23,520 --> 00:05:27,084
So by working on a separate layer and by using the overlay blend mode, we're able

82
00:05:27,084 --> 00:05:31,290
to lighten or darken specific areas of the photo.

83
00:05:31,290 --> 00:05:34,712
I can paint with white to lighten and black to darken, as I continue fine

84
00:05:34,712 --> 00:05:38,400
tuning the overall luminance values in my photo.

結果 (中文) 1:

100:00:02，110--> 00:00:07，450与旧的照片，是相当普遍的看到的图像不均匀照明。200:00:07，450--> 00:00:10，024你可以看见在左边的图像，例如，在这里，山坡上300:00:10，024--> 00:00:12，530还有一个看起来有点明亮的领域。400:00:12，530--> 00:00:16，490整体前景以及似乎有点亮。500:00:16，490--> 00:00:19，260在许多情况下这也许只是暴露问题。600:00:19，260--> 00:00:22，824例如很多前景造成低一半的反射光700:00:22，824--> 00:00:26，064这张图片看起来很亮，但有时，它可以引起的问题800:00:26，064--> 00:00:29，628与印刷，或乳液或甚至是电影，和不管原因是什么，它900:00:29，628--> 00:00:35，200可以有助于调整这些地区的照片。1000:00:35，200--> 00:00:38，800这些类型的情况中我经常要做的就是申请回避和1100:00:38，800--> 00:00:42，820燃烧到图像中，在那里我可以变亮或变暗的具体领域的效果1200:00:42，820--> 00:00:48，070仅仅通过画上它的照片。第一步是创建一个新图层1300:00:48，070--> 00:00:51，170为那躲避和燃烧，但不是所有的层。1400:00:51，170--> 00:00:54，572因此，而不只是点击创建新图层按钮，张空白纸1500:00:54，572--> 00:00:58，082我要的纸在图层面板底部的图标，按住 Alt 键，在上1600:00:58，082--> 00:01:04，270Windows 或 Option 键在 MacIntosh 上，同时单击该图层上。1700:01:04，270--> 00:01:07，780这将导致一个新的图层对话框出现的位置，在那里我可以调整属性1800:01:07，780--> 00:01:12，410我添加的新图层。我往前走，键入一个名称。1900:01:12，410--> 00:01:15，758我只是打电话这道奇和烧伤，和我要去改变混合模式为2000:01:15，758--> 00:01:19，160覆盖，也许是最重要的方面就改变这2100:01:19，160--> 00:01:25，010混合模式为叠加，将给我们我们正在寻找的行为。2200:01:25，010--> 00:01:28，732我们可以看到，在稍等。我会往前走，打开复选框2300:01:28，732--> 00:01:33，590填补这一层的叠加的中性色，即 50%灰色。2400:01:33，590--> 00:01:37，400我会告诉你一会儿用灰色填充这一层的好处。2500:01:37，400--> 00:01:40，739第一次我去前方，单击确定按钮以创建此层，2600:01:40，739--> 00:01:44，131再一次被称为减淡和加深，具有混合模式设置为叠加，这就是2700:01:44，131--> 00:01:48，577用灰色填充。一旦单击好吧，你会看到我有2800:01:48，577--> 00:01:51，810我道奇和烧伤层创建我的图层面板上。2900:01:51，810--> 00:01:56，240它充满了中间的灰色，和已更改混合模式为叠加。3000:01:56，240--> 00:01:59，530下一步是选择画笔工具。3100:01:59，530--> 00:02:03，430是的我们要使用画笔工具为此躲避和燃烧技术。3200:02:03，430--> 00:02:07，363而不是已经包含在 Photoshop 中，减淡和加深工具等3300:02:07，363--> 00:02:13，570我会选择画笔工具，然后确保我正与一些软的笔刷。3400:02:13，570--> 00:02:17，026你可以看到我有一些圆形画笔是非常模糊的眷恋3500:02:17，026--> 00:02:20，590脆的我可以选择其中之一，然后确保硬度值是所有3600:02:20，590--> 00:02:26，866到左边在 0%值的方式。我会确保为混合模式3700:02:26，866--> 00:02:30，964笔刷自身设置为正常。整体的混合模式用于3800:02:30，964--> 00:02:35，860层，不是为了刷本身。然后最后，我会调整不透明度。3900:02:35，860--> 00:02:39，282我可以使用 pop 这里来抚养一个滑块，但我一般4000:02:39，282--> 00:02:44，291只需按键盘上的数字。一号会给我 10%4100:02:44,291 --> 00:02:49,070number two will give me 20%. If I type 15 quickly that will give me4200:02:49,070 --> 00:02:54,72015%, but in most cases, I'll work with an opacity setting of 10%.4300:02:54,720 --> 00:02:57,905I'll then make sure that the colors are set to black and white, you can see those4400:02:57,905 --> 00:03:01,990at the bottom of the tool box. Black for the foreground color, and white4500:03:01,990 --> 00:03:05,413for the background color. It's a good idea to simply press the4600:03:05,413 --> 00:03:10,100letter d on your keyboard for defaults so that you have these colors set.4700:03:10,100 --> 00:03:13,250Sometimes you might have a shade of gray that looks nearly black or white for4800:03:13,250 --> 00:03:16,530example, and it's best to get a consistent result.4900:03:16,530 --> 00:03:21,340You can switch between these colors by pressing x, for exchange, on the keyboard.5000:03:21,340 --> 00:03:24,290In this case I need to darken up some areas of the photo, so I'll make sure5100:03:24,290 --> 00:03:27,330that the foreground color is set to black.5200:03:27,330 --> 00:03:30,380I'll then move my mouse out over the image, and adjust the brush size using5300:03:30,380 --> 00:03:34,948the left and right square bracket keys. The right square bracket will increase5400:03:34,948 --> 00:03:39,150the brush size and the left square bracket will decrease the brush size.5500:03:39，150--> 00:03:42，798所以用黑色作为我的前景颜色和不透明度为 10%，我可以调整我5600:03:42，798--> 00:03:46，560画笔大小和进入这一领域的山坡上，好像有点儿，然后画5700:03:46，560--> 00:03:51，198点亮。我还可以增加画笔大小在这里5800:03:51，198--> 00:03:54，800和油漆成前景区域的照片。5900:03:54，800--> 00:03:58，155现在请记住，是白色的地区不会受到影响，和6000:03:58，155--> 00:04:01，960是黑色的地区不会受到影响。6100:04:01，960--> 00:04:07，460我们只调整色调的灰色，和有时效果可能看起来有点微妙。6200:04:07，460--> 00:04:10，877您会注意到这里，例如，当我画，我们不是真的看到6300:04:10，877--> 00:04:14，243很明显的效果，和然而，如果关闭的道奇的可见性，并且燃烧6400:04:14，243--> 00:04:19，860层，然后轮到它背，你可以看到相对较强的效果。6500:04:19，860--> 00:04:23，780不是很大影响的形象，但当然，一点点的变暗。6600:04:23，780--> 00:04:27，074你总是可以增加不透明度和油漆再次及事实上，绘画6700:04:27，074--> 00:04:32，170在同一地区的多发性中风会增加在这一领域的影响。6800:04:32，170--> 00:04:35，131这可以是非常好的事情，如果您想要绘制多个笔画6900:04:35，131--> 00:04:39，093增加面积的效果。但它也是重要的是要牢记心中，7000:04:39，093--> 00:04:42，357如果您希望在这张照片甚至效果，你需要保持该鼠标按钮7100:04:42，357--> 00:04:48，230当你那整个区域上方进行绘画在释放鼠标之前按住。7200:04:48，230--> 00:04:51，080现在我提到，它是用灰色填充层有帮助的。7300:04:51，080--> 00:04:54，590理由是，有时你会发现它有助于评价7400:04:54，590--> 00:04:58，910你一直在油漆的领域。如果你有一个棋盘图案7500:04:58，910--> 00:05:02，430都有一层透明与其关联，它是不太容易，请参阅7600:05:02，430--> 00:05:05，840你将要画因那灰色的比较含蓄绘画描边7700:05:05，840--> 00:05:09，360背景下，我们能够很清楚地看到甚至得不到很多的地区7800:05:09，360--> 00:05:14，901这张照片中的效果。我会向前走然后在可见性7900:05:14，901--> 00:05:18，097为背景图像图层，然后再一次我会切换可见性8000:05:18 097--> 00:05:23，520减淡和加深层，这样我们可以很清楚看到中图像的效果。8100:05:23，520--> 00:05:27，084So by working on a separate layer and by using the overlay blend mode, we're able8200:05:27,084 --> 00:05:31,290to lighten or darken specific areas of the photo.8300:05:31,290 --> 00:05:34,712I can paint with white to lighten and black to darken, as I continue fine8400:05:34,712 --> 00:05:38,400tuning the overall luminance values in my photo.

結果 (中文) 3:

1
00:00:02110——> 00:00:07450
老照片，这是很常见的光照不均匀的图像。

2
00:00:07450——> 00:00:10024
你可以看到在左边的图像，例如，在山坡上，

3
00:00:10024——> 00:00:12530
有区，看起来有点光亮。

4
00:00:12530——> 00:00:16490
和前景似乎一点光明也。

5
00:00:16490——> 00:00:19260
在许多情况下，这可能仅仅是一个暴露的问题。

6
00:00:19260——> 00:00:22824
例如在前台很多反射光造成

7
00:00:22824下——> 00:00:26064
这个图像看起来非常明亮，但有时，它会引起的问题

8
00:00:26064——> 00:00:29628
与印刷，或乳液，甚至电影，而不管什么原因，它

9
00:00:29628——> 00:00:35200
可以调整这些地区的照片。

10
00:00:35200——> 00:00:38800
在这些类型的情况下，我通常会做的是申请一个躲避和

11
00:00:38800——> 00:00:42820
燃烧效果的图像，在那里我可以照亮或变暗的

12
00:00:42820特定领域——> 00:00:48070
照片上的照片。第一步是创建一个新层

13
00:00:48070——> 00:00:51170
，回避和燃烧，但不是任何层。

14
00:00:51170——> 00:00:54572
所以，而不是点击“创建新的图层”按钮，在空白

15
00:00:54572——>在在层面板的底部00:00:58082
纸图标，我要坚持

16
00:00 ALT键：58082——> 00:01:04270
Windows，Macintosh或Option键，同时点击图层。

17
00:01:04270——> 00:01:07780
将导致一个新的图层对话框出现，在那里我可以调整性能

18
00:01:07780——> 00:01:12410
为新的层，我添加。我先走一步，键入一个名称。

19
00:01:12410——> 00:01:15758
我就称这道奇和烧伤，我要改变混合模式为

20
00:01:15758——> 00:01:19160
覆盖，也许是最重要的方面是不断变化的，

21
00:01:19160——> 00:01:25010
混合模式为叠加，这将给我们，我们正在寻找的行为。

22
00:01:25010——> 00:01:28732
我们会看到，在短短的一瞬间。我会去打开复选框

23
00:01:28732——> 00：01:33590
填补这一层覆盖的中性色，这是50%的灰色。

24
00:01:33590——> 00:01:37400
我给你填补这一层灰色的只是一时的利益。

25
00:01:37400——> 00:01:40739
首先我会去点击，OK按钮来创建这一层，

26
00:01:40739——> 00:01:44131
又称为道奇和烧伤，有一个混合模式设置为叠加，这

27
00:01:44131——> 00:01:48577
充满了灰色。一旦我点击“好的，你会看到我有

28
00:01:48577——> 00:01:51810
我的道奇和刻录层我的图层面板创建。

29
00:01:51810——> 00:01:56240
它充满了灰色的中间，和混合模式更改为叠加。

30
00:01:56240——> 00:01:59530