1. See attached updated netlist Bee

1. See attached updated netlist Beetle_IOPAD_July31_pkg_update_breaker

2. Please use post-shrink die size =
X size: 3340.62, Y size: 3924.72

3. The number of rows on the digital signal side can be 2 or 3, but all of the RF pads need to be single row only. see attached photo as refrence.

4. Please reduce the distance from the single row pad to the outside of the package as much as possible. See attached photo as reference.

5. See attached file for customer further instruction

6. For others outside Cordio:
§ Post-ShrinkCB/CB2 Size: 39.6 um x 79.2 um

For Cordio:
§ Post-Shrink CB/CB2 Size: 50.4 um x 50.4 um

7. The integration manual requires 0.4mm pitch for Cordio.

9. Please shift the die per integration manual such that CORDIO macro corner is closest to the QFN epad edge at 381um per spec.

10. Remove any unused pads.

結果 (繁體中文) 1:

1.見所附更新網表 Beetle_IOPAD_July31_pkg_update_breaker2.請使用後收縮模大小 =尺寸: 3340.62，Y 大小: 3924.723.數位信號一邊行數可以是 2 或 3，但是所有的射頻墊需要單個行只。作為參考，請參閱所附的照片。4.請請縮短的距離從單個行墊到盡可能多的包裝的外面。作為參考，請參閱所附的照片。5.見所附的檔為客戶進一步指令6.對於其他外 Cordio:§ 郵政-ShrinkCB/CB2 大小: 嗯 x 79.2 39.6 嗯為 Cordio:§ 後縮小 CB/CB2 大小: 50.4 x 50.4 嗯嗯7.集成手冊要求 0.4 m m 間距為 Cordio。9.請請轉移每集成手冊這樣 CORDIO 宏角是接近 QFN epad 邊緣在 381um 規格模具。10.刪除任何未使用的墊。

結果 (繁體中文) 2:

1.見附圖更新的網表Beetle_IOPAD_July31_pkg_update_breaker 2。請使用收縮後芯片尺寸= X規格：3340.62，Y尺寸：3924.72 3。行上的數字信號側的數目可以是2或3，但所有的射頻焊盤需要是唯一的單排。詳見附圖為refrence。4。請減少從單列墊的距離到包裝外面盡可能。見所附照片作為參考。5。見客戶的進一步指令附件6。對於CORDIO以外的其他人：§ 後ShrinkCB / CB2尺寸：39.6微米x 79.2微米對於CORDIO：§ 收縮後CB / CB2尺寸：50.4微米x 50.4微米7。集成手冊要求0.4mm間距的CORDIO。9。請移位每集成手冊模具使得CORDIO宏角是最接近的QFN EPAD邊緣在按規格381um。10。刪除任何未使用墊片。