檢視不良品，確實有保護層厚度高於電極異常，取廠內保留樣品進行保護層厚度

檢視不良品，確實有保護層厚度高於電極異常，取廠內保留樣品進行保護層厚度量測比較，不良品之保護層比電極厚度高約15um,可確認空焊異常為保護層過厚所引起。

結果 (英文) 1:

View defective, the protective layer thickness than does have abnormal electrode, retained sample taken plant protection layer for protecting the layer thickness of comparing the measured metric, high defective ratio of the electrode thickness of about 15um, air welding abnormality is confirmed that the protective layer is too thick as cause.

結果 (英文) 2:

To examine the bad products, there is indeed a protective layer thickness higher than the electrode anomaly, take the factory to retain the sample for the protection layer thickness measurement comparison, the protective layer of the bad products than the electrode thickness of about 15um, can confirm that the air welding anomaly caused by the protection layer too thick. ...

結果 (英文) 3:

Check the defective products and find out that the thickness of the protective layer is indeed higher than that of the electrode. Take the samples retained in the factory for measurement and comparison of the thickness of the protective layer. The thickness of the protective layer of the defective products is about 15um higher than that of the electrode. It can be confirmed that the abnormal air welding is caused by the excessive thickness of the protective layer.