This kind of fire usually consists

This kind of fire usually consists of flammable materials that are exited from a pressurized source and there have been source of ignition in the environment. The speed of flammables effects greatly on the kind of fire, because initially the exit speed must be high enough to be sent to the air into the jet, and secondly the flame will be con- stant at a point that the flame speed will be equal to the local velocity of the gas mixture. When the exit speed of flammables increases, the air increases (in the mixture) too and as a result fuel consideration decreases in the jet, the flame distances more from the fuel exit and finally when the flame is far enough, the fuel density is lower than the low limit of flammability and the fire (flame) extinguishes. In the modeling of eruptive fire, the thermal radiation is the only factor that is studied as the sample for the damage of this type of hazard. The aim of erup- tive fire modeling was assessing to the jet diameter and length and the rate of thermal radiation of burning jet at any point. It must be noted that in the modeling diagrams, the limit of radiation rate due to fire that causes severe injuries to humans is considered as 37Kw/m2

結果 (繁體中文) 1:

這種火通常由那些從加壓源退出，也有環境一直火源可燃材料。大大的那種火易燃效果的速度，因為最初的出口速度必須足夠高，被發送​​到空氣進入噴射，其次火焰會在一個點CON組STANT火焰速度將等於到的氣體混合物的局部速度。當可燃物增加時，空氣的增加（在混合物）的出口速度過，其結果燃料考慮在噴射的減小，火焰的距離從所述燃料出口更最後當火焰足夠遠，燃料密度較低比易燃的下限和火（火焰）熄滅。在暴發火的造型，的熱輻射是研究作為樣品對於這種類型的危險的損壞的唯一因素。erup-略去火災建模的目的是評估對射流的直徑和長度及在任何點燃燒噴射的熱輻射率。必須指出的是，在模擬圖中，導致嚴重傷害人體的輻射率因火災極限被認為是37KW /平方米

結果 (繁體中文) 2:

Apakah Anda pikir sikap kerja Anda tidak apa-apa?

結果 (繁體中文) 3:

這類火灾通常是由從加壓源中排出的易燃資料構成，並且在環境中存在著火源。可燃物的速度對火焰的種類有很大的影響，因為一開始出口速度必須足够高，以使空氣進入射流，然後火焰將保持在火焰速度等於氣體混合物的局部速度的點上。當可燃物的出口速度新增時，空氣（混合氣中）也會新增，從而導致噴氣機對燃料的考慮减少，火焰距離燃料出口的距離變遠，最後當火焰足够遠時，燃料密度低於可燃性下限，火焰熄滅。在噴發火灾的類比中，熱輻射是研究這類火灾危害的唯一樣本。有效火灾類比的目的是評估燃燒射流在任意點的直徑、長度和熱輻射率。必須注意的是，在建模圖中，火灾對人體造成嚴重傷害的輻射率限值為37Kw/m2