用刮板或毛刷在粘合面由内向外均匀涂胶，防止欠胶，常温23±2℃，湿度

用刮板或毛刷在粘合面由内向外均匀涂胶，防止欠胶，常温23±2℃，湿度

結果 (英文) 1:

With a scraper or brush on adhesive surface coating evenly from the inside out to prevent defaulting gel at room temperature 23 ± 2 ℃, humidity under the condition of <70% dry for more than 10 minutes (the layer non-stick hand shall prevail).

結果 (英文) 2:

With a scraper or brush in the adhesive surface coating evenly from the inside out, preventing the less glue, room temperature 23 ± 2 ℃, humidity <70% dry conditions set more than 10 minutes (subject to layer a little sticky hands).

結果 (英文) 3:

With a scraper or brush on the adhesive surface from the inside out uniform coating, prevent less adhesive, at 23 - 2 DEG C, <70% humidity hanging above 10 minutes (omitted by layer non stick in hand.).