根据机体1--9档加工主轴承孔检查记录，结合相对应的曲轴主轴颈加工检查

根据机体1--9档加工主轴承孔检查记录，结合相对应的曲轴主轴颈加工检查记录，按照六点平均公式计算出主轴瓦的厚度。δ=（主轴承孔径--曲轴主轴颈--Δ）/2式中：δ---为要选配的主轴瓦厚度。Δ---指的油隙，在计算时取0.275mm。主轴承孔径、曲轴主轴颈是指实测数据的六点平均值。

結果 (英文) 1:

Processed according to the organism 1--9 main bearing bore inspection records, crankshaft machining combined with corresponding records, in accordance with the six-point average formula to calculate spindle tile thickness. Δ = (main bearing bore diameter – crankshaft – δ)/2 in the formula: δ---for the spindle to match tile thickness. Δ---oil-gap, take 0.275mm when evaluated. Main bearing bore diameter, the crankshaft is a six-point average of the measured data.

結果 (英文) 2:

According to the body 1 - 9 files processed main bearing bore inspection records, combined with the corresponding crankshaft main journal processing inspection records, in accordance with the six-point formula to calculate the average thickness of the main bush. δ = (main bearing bore - crankshaft main journal - Δ) / 2 where: δ --- to be optional main bearing thickness. Δ --- refers to the oil clearance in the calculation taking 0.275mm. Main bearing bore, crankshaft main journal refers to the average of six measured data.

結果 (英文) 3:

According to the 1--9 file processing main bearing hole inspection records, combined with the crankshaft main journal processing inspection record corresponds, in accordance with the six point average formula to calculate the thickness of the main bearing. Delta = (main bearing hole of crankshaft main journal - Δ) /2 type: δ - axis tile thickness matching. The oil gap Delta - that, in the calculation of 0.275mm. Main bearing crankshaft main journal diameter, refers to the six point average value of measured data.